Sony Xperia GO ST27I spare parts

Technical Characteristics of Sony Xperia GO ST27I Repuestos

The Sony Xperia GO ST27I is a robust and durable smartphone designed for active users. The device is equipped with a range of replaceable parts to ensure its longevity. The main repuestos (spare parts) include:

• Display Screen: 3.5 inches, 320 x 480 pixels
• Battery: 1305 mAh Li-Ion, user replaceable
• Rear Camera Module: 5.0 MP, autofocus, LED flash
• Front Camera Module: VGA
• Speaker and Microphone
• Physical Buttons: Power, Volume, and Camera
• Charging Port and Flex Cable
• SIM/SD Card Tray

Instructions for Replacing Sony Xperia GO ST27I Repuestos

1. Replacing the Display Screen

To replace the display screen of your Sony Xperia GO ST27I, follow these steps:

• Turn off the device and remove the back cover and battery.
• Using a screwdriver, remove all screws securing the back panel.
• Carefully pry open the back panel using a plastic opening tool.
• Disconnect the display connector from the motherboard.
• Gently lift and remove the old display screen.
• Place the new display screen in position and reconnect the display connector.
• Reassemble the back panel and secure it with the screws.
• Reinsert the battery and back cover. Turn on the device to test the new screen.

2. Replacing the Battery

Follow these steps to replace the battery of your Sony Xperia GO ST27I:

• Turn off the device and remove the back cover.
• Locate the battery and disconnect its connector from the motherboard.
• Carefully remove the old battery.
• Position the new battery and reconnect the battery connector.
• Replace the back cover and turn on the device to ensure proper installation.

3. Replacing the Rear Camera Module

To replace the rear camera module, follow these steps:

• Turn off the device and remove the back cover and battery.
• Remove the screws securing the back panel and carefully pry it open.
• Locate the rear camera module and disconnect its connector from the motherboard.
• Gently lift and remove the old camera module.
• Place the new camera module in position and reconnect the connector.
• Reassemble the back panel, secure it with the screws, and reinstall the battery and back cover.
• Turn on the device to test the new camera module.

4. Replacing the Charging Port and Flex Cable

To replace the charging port and flex cable, follow these detailed steps:

• Turn off the device and remove the back cover and battery.
• Remove all screws securing the back panel and carefully pry it open.
• Disconnect the flex cable from the motherboard and gently detach it from the device.
• Remove the old charging port with the attached flex cable.
• Align the new charging port with the flex cable and install it in place.
• Reconnect the flex cable to the motherboard.
• Reassemble the back panel, secure it with screws, and reinstall the battery and back cover.
• Turn on the device and check if the new charging port is functioning correctly.