Sony Xperia J ST26I spare parts

Technical Characteristics of Sony Xperia J ST26I Repuestos

The Sony Xperia J ST26I, known for its sleek design and reliable performance, has several key replacement parts (repuestos) that users may need to replace over time. Understanding the technical characteristics of these parts can help ensure you choose the right components.

Display Assembly

• Type: TFT capacitive touchscreen
• Size: 4.0 inches
• Resolution: 480 x 854 pixels

Battery

• Type: Li-Ion (Lithium Ion)
• Capacity: 1750 mAh

Camera

• Rear Camera: 5 MP, autofocus, LED flash
• Front Camera: VGA

Other Components

• SIM Card Tray
• Charging Port
• Speakers
• Volume and Power Buttons

Instructions for Replacing Sony Xperia J ST26I Repuestos

To replace various components of the Sony Xperia J ST26I, follow the detailed steps below. Always ensure you have the right tools and replacement parts before starting the process.

Tools Required

• Small Phillips screwdriver
• Plastic opening tools
• Tweezers
• Suction cup (for screen removal)
• Anti-static wrist strap (recommended)

Step-by-Step Instructions

1. Power Off the Device

Before any replacement, make sure the phone is completely powered off to avoid any accidental damage or short-circuit.

2. Remove the Back Cover and Battery

• Use the plastic opening tool to gently pry open the back cover.
• Take out the battery by lifting it from the bottom edge.

3. Remove SIM Card and MicroSD Card

• Slide out the SIM card tray.
• Remove the MicroSD card if present.

4. Unscrew and Remove the Midframe

• Using the small Phillips screwdriver, remove all the screws securing the midframe.
• Carefully lift the midframe using the opening tools.

5. Disconnect and Remove the Screen Assembly

• Gently disconnect the ribbon cables attached to the motherboard.
• Use a suction cup to lift the screen assembly if necessary.

6. Replace the Battery

• Disconnect the old battery's connector from the motherboard.
• Place the new battery in the same position and reconnect it.

7. Replace the Camera

• Disconnect the camera module from the motherboard.
• Carefully remove the old camera and replace it with the new one.
• Reconnect the camera module to the motherboard.

8. Replace the Charging Port or Other Internal Components

• Disconnect the faulty component such as the charging port.
• Replace it with the new part ensuring all connections are secure.

9. Reassemble the Device

• Reconnect all the ribbon cables to the motherboard.
• Place the midframe back and secure it with screws.
• Insert the SIM card and MicroSD card back into their slots.
• Attach the battery and snap the back cover into place.

10. Test the Repairs

Power on the device and test all functions, including the screen, battery, camera, and charging port to ensure everything is working correctly.