Sony Xperia L C2105 spare parts

Technical Characteristics of Sony Xperia L C2105 Repuestos

The Sony Xperia L C2105 is known for its durability and ease of repair. Below are the technical characteristics of the repuestos (replacement parts) available for the Sony Xperia L C2105:

Display

• Type: TFT capacitive touchscreen, 16M colors
• Size: 4.3 inches (~60.2% screen-to-body ratio)
• Resolution: 480 x 854 pixels (~228 ppi pixel density)
• Protection: Scratch-resistant glass

Battery

• Type: Li-Ion 1750 mAh, removable
• Stand-by: Up to 498 h (2G) / Up to 454 h (3G)
• Talk time: Up to 8 h 30 min (2G) / Up to 9 h (3G)

Camera

• Primary: 8 MP, autofocus, LED flash
• Features: Geo-tagging, touch focus, face and smile detection, HDR, sweep panorama
• Video: 720p@30fps

Internals

• Chipset: Qualcomm MSM8230 Snapdragon 400
• CPU: Dual-core 1.0 GHz Krait
• GPU: Adreno 305

Instructions for Replacing Sony Xperia L C2105 Repuestos

Follow these detailed instructions carefully to replace any components of your Sony Xperia L C2105:

Tools You'll Need

• Pry tool
• Small Phillips and flathead screwdriver
• Tweezers
• Plastic spudger
• Suction cup tool
• Replacement part (e.g., battery, screen, etc.)

General Instructions

• 1. Power off the phone: Make sure your Sony Xperia L C2105 is completely turned off before starting the replacement process.
• 2. Remove the back cover: Use your fingernail or a plastic pry tool to gently lift the back cover off the device. This will expose the battery and other internal components.
• 3. Remove the battery: Carefully lift the battery out of its compartment using a pry tool if necessary.
• 4. Unscrew the midframe: Use a small Phillips screwdriver to remove all screws securing the midframe. Keep these screws in a safe place.
• 5. Detach the midframe: Once all screws are removed, gently use a pry tool to separate the midframe from the main body of the phone.
• 6. Disconnect flex cables: Using tweezers and a plastic spudger, carefully disconnect all flex cables that connect various components to the motherboard.

Instructions for Specific Components

Replacing the Screen

• 1. Remove screws: Additional screws holding the screen assembly in place may need to be unscrewed.
• 2. Separate the screen: Use a suction cup tool to gently lift the screen off the front. Make sure to disconnect any flex cables attached to the screen.
• 3. Install new screen: Place the new screen in position and reconnect all flex cables.
• 4. Reassemble: Reverse the disassembly steps to reassemble the phone.

Replacing the Battery

• 1. Remove old battery: If not done already, carefully lift out the old battery with a pry tool.
• 2. Insert new battery: Place the new battery into the compartment and ensure it is properly connected.
• 3. Close the device: Replace the midframe and all screws, then reattach the back cover.

Replacing the Camera

• 1. Access the camera module: Follow the general instructions to detach the midframe and expose the camera module.
• 2. Disconnect the camera: Use tweezers to disconnect the camera module from the motherboard.
• 3. Remove the old camera: Carefully lift the camera module out of its slot.
• 4. Install the new camera: Place the new camera module into the slot and reconnect it to the motherboard.
• 5. Reassemble: Follow the reverse order of disassembly to put the phone back together.

Follow these instructions carefully to ensure a successful replacement. If unsure, always seek professional assistance to avoid damage to your device.