Sony Xperia L3 I3312 I3322 I4312 I4332 spare parts

Technical Characteristics of Sony Xperia L3 I3312 I3322 I4312 I4332 Replacement Parts

The Sony Xperia L3 series is known for its durability and performance. Below are the key technical characteristics for replacement parts of the Sony Xperia L3 I3312, I3322, I4312, and I4332 models:

Screen

• Type: IPS LCD capacitive touchscreen
• Size: 5.7 inches
• Resolution: 720 x 1440 pixels
• Protection: Corning Gorilla Glass 5

Battery

• Type: Non-removable Li-Ion 3300 mAh battery
• Charging: Fast charging 10W

Camera

• Main Camera: Dual 13 MP, f/2.2, 26mm (wide) + 2 MP, f/2.4, (depth)
• Features: LED flash, HDR, panorama

Other Parts

• Chipset: Mediatek MT6762 Helio P22
• Memory Card Slot: microSDXC (uses shared SIM slot)
• USB: USB Type-C 2.0, USB On-The-Go

Instructions for Replacing Sony Xperia L3 I3312 I3322 I4312 I4332 Parts

Follow the detailed steps below to replace parts in your Sony Xperia L3 I3312, I3322, I4312, or I4332 effectively:

1. Screen Replacement

• Power off the device.
• Remove the SIM card tray using an ejector tool.
• Use a heat gun to gently warm the edges of the screen to soften the adhesive.
• Insert a plastic opening tool between the screen and frame to carefully pry them apart.
• Disconnect the ribbon cables attaching the screen to the motherboard.
• Replace with the new screen and reconnect the ribbon cables.
• Press the new screen gently into place and let the adhesive bond.
• Power on the device to test the new screen's functionality.

2. Battery Replacement

• Power off the device.
• Remove the back panel using a plastic prying tool.
• Locate and disconnect the battery connector from the motherboard.
• Gently lift and remove the battery from its adhesive using a plastic card.
• Insert the new battery and reconnect its connector to the motherboard.
• Reattach the back panel, making sure it is securely in place.
• Power on the device to ensure the new battery is functioning properly.

3. Camera Replacement

• Power off the device.
• Use a plastic prying tool to remove the back panel.
• Locate the camera module and disconnect the ribbon cable.
• Remove the screws securing the camera module and gently lift it out.
• Place the new camera module and secure it with screws.
• Reconnect the ribbon cable to the motherboard.
• Reattach the back panel.
• Power on the device to test the new camera's functionality.

4. USB Port Replacement

• Power off the device.
• Remove the back panel using a plastic prying tool.
• Locate the USB port on the motherboard.
• Carefully unsolder the old USB port from the motherboard using a soldering iron.
• Position the new USB port and solder it to the motherboard.
• Reattach the back panel.
• Power on the device and test the new USB port.

Ensure that you have the appropriate tools and replacement parts before beginning any repair process.