Sony Xperia Mini Pro SK17I spare parts

Technical Characteristics of Sony Xperia Mini Pro SK17I Repuestos

The Sony Xperia Mini Pro SK17I is a compact smartphone that offers the essential features required for everyday use. Below are the technical characteristics and common replacement parts (repuestos):

Technical Characteristics

• Display: 3.0 inches, 320 x 480 pixels
• Processor: 1 GHz Scorpion
• RAM: 512 MB
• Storage: 512 MB, expandable via microSD up to 32 GB
• Camera: 5 MP rear camera, no front camera
• Battery: 1200 mAh removable Li-Ion battery
• Operating System: Android 2.3 (Gingerbread), upgradable to 4.0 (Ice Cream Sandwich)
• Dimensions: 92 x 53 x 18 mm
• Weight: 136 g

Common Repuestos

• Touch Screen Digitizer
• LCD Display Screen
• Battery
• Camera Module
• Charging Port
• Keypad Keyboard Flex Cable Ribbon

Instructions for Replacing Sony Xperia Mini Pro SK17I Repuestos

Follow these detailed instructions to replace parts (repuestos) of your Sony Xperia Mini Pro SK17I.

Tools Needed

• Small Phillips screwdriver
• Plastic opening tools
• Tweezers
• Replacement parts (digitizer, LCD, battery, camera, etc.)

General Instructions

• Step 1: Power Off the Device

  Ensure the device is completely powered off before starting the repair process.

• Step 2: Remove the Back Cover and Battery

  Gently pry open the back cover using a plastic opening tool. Remove the battery by lifting it from the bottom.

• Step 3: Remove Screws and Disassemble

  Using the small Phillips screwdriver, remove the screws securing the back of the phone. Carefully pry open the phone's casing using a plastic opening tool.

• Step 4: Disconnect Connectors

  Identify and disconnect the ribbon cables and connectors that link the different components to the motherboard. Use tweezers if necessary.

Replacing the Touch Screen Digitizer

• Follow the general instructions above to disassemble the phone.
• Gently pry off the old digitizer using a plastic opening tool.
• Carefully align and attach the new digitizer to the front panel.
• Reconnect all ribbon cables and connectors.
• Reassemble the phone by reversing the disassembly steps.

Replacing the LCD Display Screen

• Disassemble the phone following the general instructions.
• Remove the screws securing the LCD screen.
• Use a plastic opening tool to carefully separate the LCD screen from the frame.
• Align the new LCD screen and secure it with screws.
• Reconnect all ribbon cables and connectors.
• Reassemble the phone by reversing the disassembly steps.

Replacing the Battery

• Simply pop out the old battery after removing the back cover.
• Insert the new battery in the same orientation.
• Replace the back cover.

Replacing the Camera Module

• Follow the disassembly process outlined earlier.
• Locate the camera module and disconnect its ribbon cable.
• Gently remove the old camera module.
• Place the new camera module in the same spot and reconnect the ribbon cable.
• Reassemble the phone by reversing the disassembly steps.

Replacing the Charging Port

• Disassemble the phone as per the general instructions.
• Locate the charging port and disconnect any attached connectors.
• Use a soldering iron to carefully detach the old charging port (requires soldering skills).
• Align and solder the new charging port in place.
• Reconnect all ribbon cables and connectors.
• Reassemble the phone by reversing the disassembly steps.

Replacing the Keypad Keyboard Flex Cable Ribbon

• Disassemble the phone following the steps above.
• Locate and carefully remove the old flex cable ribbon connected to the keypad.
• Attach the new flex cable ribbon in the same orientation.
• Reconnect any necessary connectors and ensure the keypad functions smoothly.
• Reassemble the phone by reversing the disassembly steps.

Following these detailed instructions will help you successfully replace various parts (repuestos) of the Sony Xperia Mini Pro SK17I. Always handle the components with care to avoid damage.