Sony Xperia Mini ST15I spare parts

Technical Characteristics of Sony Xperia Mini ST15I Repuestos

Below are the technical characteristics of the replacement parts (repuestos) for the Sony Xperia Mini ST15I:

• Display Screen: 3.0 inches, 320 x 480 pixels resolution, TFT capacitive touchscreen
• Battery: Li-Ion 1200 mAh, user replaceable
• Camera Module: 5 MP, autofocus, LED flash
• Motherboard: Includes processor, memory, and integrated circuits
• Housing/Chassis: Plastic body, available in various colors
• Buttons and Flex Cables: Power button, volume buttons, back button, home button, and flex cables for connectivity
• Speaker: Loudspeaker and earpiece module

Instructions for Replacing Sony Xperia Mini ST15I Repuestos

Follow these detailed instructions to replace various parts (repuestos) of the Sony Xperia Mini ST15I:

Tools Needed:

• Screwdriver set (Phillips and Torx)
• Plastic pry tools
• Tweezers
• SIM card ejector tool
• Adhesive strips (for screen replacement)

Battery Replacement:

• 1. Power off the device completely.
• 2. Remove the back cover by sliding it off gently.
• 3. Using a plastic pry tool, gently lift and remove the battery from the compartment.
• 4. Insert the new battery into the compartment, ensuring the contacts align correctly.
• 5. Replace the back cover by sliding it back into place.
• 6. Power on the device to ensure proper installation.

Screen Replacement:

• 1. Power off the device completely and remove the battery.
• 2. Use a screwdriver to remove all screws securing the front panel.
• 3. Carefully use a plastic pry tool to detach the screen from the chassis, ensuring you do not damage any flex cables.
• 4. Disconnect the ribbon cables connecting the screen to the motherboard.
• 5. Place the new screen in position and connect the ribbon cables.
• 6. Secure the new screen with screws that were removed earlier.
• 7. Reinsert the battery and back cover.
• 8. Power on the device to ensure the new screen is functioning correctly.

Camera Module Replacement:

• 1. Power off the device completely and remove the back cover and battery.
• 2. Unscrew any screws securing the camera module.
• 3. Gently pry out the camera module using a plastic tool, being cautious of the flex cables.
• 4. Disconnect the old camera module from the motherboard.
• 5. Connect the new camera module and place it into position.
• 6. Secure the new camera module with screws.
• 7. Reinsert the battery and back cover.
• 8. Power on the device and test the camera to ensure it is working properly.

Motherboard Replacement:

• 1. Power off the device, remove the back cover and battery.
• 2. Unscrew all screws securing the motherboard.
• 3. Disconnect all flex cables connected to the motherboard.
• 4. Carefully remove the motherboard from the device.
• 5. Place the new motherboard in the correct position.
• 6. Connect all flex cables to the new motherboard.
• 7. Screw the motherboard back into place.
• 8. Reinsert the battery and back cover.
• 9. Power on the device to ensure the new motherboard is functioning correctly.