Sony Xperia Miro ST23I spare parts

Sony Xperia Miro ST23I Technical Characteristics

The Sony Xperia Miro ST23I is equipped with the following technical specifications:

• Display: 3.5-inch TFT capacitive touchscreen, 320 x 480 pixels resolution
• Processor: 800 MHz Cortex-A5
• RAM: 512 MB
• Storage: 4 GB internal (up to 2.2 GB available to the user), microSD up to 32 GB
• Camera: 5 MP rear camera with LED flash, VGA front camera
• Operating System: Android v4.0.4 (Ice Cream Sandwich)
• Battery: Li-Ion 1500 mAh
• Connectivity: Wi-Fi 802.11 b/g/n, Bluetooth 2.1, microUSB 2.0
• Dimensions: 113 x 59.4 x 9.9 mm
• Weight: 110 g

Instructions for Replacing Sony Xperia Miro ST23I Repuestos

Required Tools:

• Small Phillips screwdriver
• Plastic opening tools
• ESD-safe tweezers
• Replacement parts (battery, screen, camera, etc.)

Step-by-Step Replacement Guide:

Battery Replacement:

• Step 1: Power off the device by holding down the power button and selecting ""Power off"".
• Step 2: Remove the back cover by gently prying it off from one of the corners using a plastic opening tool.
• Step 3: Locate the battery and use the tab to lift and remove the battery from the compartment.
• Step 4: Insert the new battery by aligning the contacts and pressing it into place.
• Step 5: Replace the back cover and power on the device to ensure the new battery is working properly.

Screen Replacement:

• Step 1: Remove the back cover and battery as described in the battery replacement section.
• Step 2: Locate and remove all screws securing the midframe using a small Phillips screwdriver.
• Step 3: Use a plastic opening tool to carefully pry off the midframe, starting from one of the corners.
• Step 4: Disconnect the ribbon cables connecting the screen to the motherboard using ESD-safe tweezers.
• Step 5: Gently lift and remove the damaged screen from the frame.
• Step 6: Align the new replacement screen and carefully connect the ribbon cables to the motherboard.
• Step 7: Reattach the midframe by snapping it back into place and securing it with the previously removed screws.
• Step 8: Replace the battery and back cover, then power on the device to test the new screen.

Camera Replacement:

• Step 1: Remove the back cover, battery, and midframe as described in the previous sections.
• Step 2: Locate the camera module on the motherboard.
• Step 3: Use ESD-safe tweezers to disconnect the camera module from the motherboard.
• Step 4: Carefully lift and remove the faulty camera module.
• Step 5: Align and connect the new camera module to the motherboard using ESD-safe tweezers.
• Step 6: Reattach the midframe, battery, and back cover, then power on the device to test the new camera.

Following these detailed steps will help you successfully replace various parts (repuestos) of your Sony Xperia Miro ST23I. If you encounter any issues during the repair process, it is advisable to seek professional assistance.