Sony Xperia Neo L spare parts

Technical Characteristics of Sony Xperia Neo L Repuestos

1. Screen

• Type: TFT capacitive touchscreen
• Size: 4.0 inches
• Resolution: 480 x 854 pixels

2. Battery

• Type: Li-Ion 1500 mAh
• Stand-by time: Up to 575 hours
• Talk time: Up to 7 hours 53 min

3. Camera

• Primary: 5 MP, autofocus, LED flash
• Video: 720p@30fps
• Secondary: VGA

4. Connectivity

• WLAN: Wi-Fi 802.11 b/g/n, DLNA, hotspot
• Bluetooth: v2.1, A2DP, EDR
• GPS: Yes, with A-GPS
• USB: microUSB v2.0, USB Host

Instructions on How to Replace Sony Xperia Neo L Repuestos

Step 1: Power Off the Device

Ensure your Sony Xperia Neo L is completely powered off before starting disassembly.

Step 2: Remove the Back Cover

Gently pry open the back cover using a plastic opening tool. Start from the corner and work your way around the edges.

Step 3: Remove the Battery

Once the back cover is removed, carefully lift out the battery using your fingers or a plastic tool.

Step 4: Take Out SIM and SD Cards

Remove the SIM card and SD card from their respective slots.

Step 5: Unscrew the Midframe

Using a small Phillips screwdriver, remove all the screws securing the midframe. Keep track of all screws as they may differ in size.

Step 6: Separate the Midframe

Gently pry apart the midframe from the main body using a plastic opening tool. Be cautious about the flex cables that may still be connected.

Step 7: Disconnect Flex Cables

Carefully disconnect all the visible flex cables. Use a plastic tool to avoid damaging the connectors.

Step 8: Replace the Desired Repuesto

Now you can replace the desired part such as the screen, camera, or any other component. Gently remove the faulty part and replace it with the new repuesto.

Step 9: Reassemble the Device

• Reconnect all flex cables you had disconnected.
• Reattach the midframe and secure it with the screws.
• Insert the SIM card and SD card back into their slots.
• Reinsert the battery into its compartment.
• Snap the back cover back on.

Step 10: Power On and Test

Finally, power on the device and test to ensure everything is functioning correctly.