Sony Xperia Neo MT15I spare parts

Technical Characteristics of Sony Xperia Neo MT15I Repuestos

The Sony Xperia Neo MT15I is a mid-range smartphone that features a range of technical characteristics that require specific replacement parts (repuestos). Below are the key technical specifications of the device:

• Display: 3.7 inches, 480 x 854 pixels, LCD capacitive touchscreen
• Processor: Qualcomm MSM8255 Snapdragon S2
• RAM: 512 MB
• Storage: 320 MB internal, expandable via microSD up to 32 GB
• Camera: 8 MP rear camera with autofocus and LED flash
• Battery: Li-Ion 1500 mAh
• Operating System: Android 2.3 (Gingerbread), upgradable to 4.0 (Ice Cream Sandwich)

Instructions on How to Replace Sony Xperia Neo MT15I Repuestos

Tools Required:

• Small Phillips screwdriver
• Plastic opening tools
• Tweezers
• Suction cup (optional for screen removal)

Steps for Replacing the Battery:

1. Turn off your Sony Xperia Neo MT15I and remove the back cover by gently prying it open with your fingernail or a plastic opening tool.
2. Remove the battery by lifting it from the indentation located at the bottom of the battery compartment.
3. Insert the new battery into the compartment, ensuring that the gold contacts on the battery align with the contacts in the phone.
4. Replace the back cover and press it down around the edges to snap it back into place.
5. Turn on the phone to ensure the new battery is functioning correctly.

Steps for Replacing the Screen:

1. Turn off your device and remove the back cover and battery.
2. Use the Phillips screwdriver to remove all the screws securing the midframe. Set the screws aside in a safe place.
3. Gently pry the midframe away from the phone using a plastic opening tool.
4. Disconnect the screen connector from the motherboard using tweezers.
5. If using a suction cup, place it on the front screen and gently pull to lift the screen away from the phone body. Alternatively, carefully pry the screen away using a plastic opening tool.
6. Align the new screen with the phone body and connect the screen connector back to the motherboard.
7. Reattach the midframe and secure it with the screws removed earlier.
8. Insert the battery and replace the back cover.
9. Turn on the phone to ensure the new screen is working correctly.

Steps for Replacing the Camera Module:

1. Turn off the phone and remove the back cover, battery, and midframe as described in the previous steps.
2. Locate the camera module on the motherboard and gently disconnect the ribbon cable using tweezers.
3. Remove the camera module by gently lifting it from its socket.
4. Place the new camera module into the socket and reconnect the ribbon cable.
5. Reassemble the midframe, secure it with the screws, and replace the battery and back cover.
6. Turn on the phone to ensure the new camera module is functioning correctly.