Sony Xperia P LT22I spare parts

Technical Characteristics of Sony Xperia P LT22I Repuestos

The Sony Xperia P LT22I is equipped with the following technical characteristics:

• Model Number: LT22I
• Screen size: 4 inches
• Resolution: 540 x 960 pixels
• Processor: Dual-core 1 GHz Cortex-A9
• RAM: 1 GB
• Storage: 16 GB internal memory (non-expandable)
• Camera: 8 MP rear camera
• Battery: Non-removable Li-Ion 1305 mAh battery
• Operating System: Android OS, v2.3 (Gingerbread), upgradable to v4.1.2 (Jelly Bean)

Instructions on How to Replace Sony Xperia P LT22I Repuestos

Tools Required:

• Plastic pry tools
• Screwdriver set (including T5 and T6 Torx)
• Tweezers

Battery Replacement

• Step 1: Power off the phone and remove the SIM card tray.
• Step 2: Use a plastic pry tool to gently separate the back cover from the phone. Be cautious as the cover is held by small clips.
• Step 3: Unscrew the screws securing the battery using the T5 Torx screwdriver.
• Step 4: Carefully disconnect the battery connector using tweezers.
• Step 5: Remove the old battery and replace it with the new one. Reconnect the battery connector.
• Step 6: Screw back the screws and reassemble the back cover.
• Step 7: Reinsert the SIM card tray and power on the phone to test the new battery.

Screen Replacement

• Step 1: Turn off the phone and remove the SIM card tray.
• Step 2: Using a plastic pry tool, carefully separate the back cover from the phone.
• Step 3: Unscrew all visible screws using a T6 Torx screwdriver.
• Step 4: Gently pry open the mid-frame to access the internal components.
• Step 5: Disconnect the screen’s ribbon cable connector.
• Step 6: Use the plastic pry tool to lift and remove the old screen from the frame.
• Step 7: Position the new screen and connect its ribbon cable.
• Step 8: Reassemble the mid-frame and secure all screws back in place.
• Step 9: Reattach the back cover and insert the SIM card tray.
• Step 10: Power on the phone to verify the new screen is functioning correctly.

Camera Replacement

• Step 1: Power off the phone and remove the SIM card tray.
• Step 2: Separate the back cover using a plastic pry tool.
• Step 3: Unscrew the screws around the camera area using a T5 Torx screwdriver.
• Step 4: Carefully disconnect the camera's flex cable connector.
• Step 5: Remove the old camera and place the new camera in position.
• Step 6: Reconnect the camera's flex cable connector.
• Step 7: Screw back the screws and reassemble the back cover.
• Step 8: Insert the SIM card tray and power on the phone to test the new camera.