Sony XPeria Pro 1 XQ-BE 52 XQ-BE62 XQ-BE72 spare parts

Technical Characteristics of Sony XPeria Pro 1 XQ-BE 52 XQ-BE62 XQ-BE72 Repuestos

The Sony Xperia Pro 1 XQ-BE 52 XQ-BE62 XQ-BE72 spare parts are of the highest quality to ensure the optimal functionality of your smartphone.

• Display: 6.5" 4K HDR OLED, resolution of 1644 x 3840 pixels
• Processor: Qualcomm Snapdragon 865
• RAM: 12GB
• Storage: 512GB
• Battery: 4000mAh capacity with fast charging support
• Camera: Triple rear camera system with 12MP Wide, 12MP Ultra-Wide, 12MP Telephoto lenses
• Front Camera: 8MP sensor for selfies
• Operating System: Android 10

Instructions for Replacing Sony XPeria Pro 1 XQ-BE 52 XQ-BE62 XQ-BE72 Repuestos

Tools You Need

• Phillips #000 screwdriver
• Plastic opening tool
• Spudger
• Tweezers

Step 1: Switch off the Device

Before you begin the repair process, ensure that your Sony Xperia Pro 1 is switched off to avoid any possible short circuits.

Step 2: Remove the Back Cover

Insert the plastic opening tool into the small gap between the back cover and the frame of the phone. Gently move the tool around the edges of the phone to release the clips holding the back cover.

Step 3: Remove the Battery

Use the Phillips #000 screwdriver to remove the screws securing the battery connector. Ther, use the spudger to disconnect the battery connector. Gently lift the battery out of its housing.Note: Please handle the battery with care to avoid any damage or injury.

Step 4: Replace the Required Part

Now the phone is open, you can replace the required parts. This could be a speaker module, camera unit, charging port, volume or power buttons etc.

Step 5: Assemble the Phone

Put the new parts into their appropriate places and reassemble the phone in reverse order. Make sure all the screws are tightened and all connectors are correctly attached.

Once reassembled, switch on your Sony Xperia Pro 1 and check the functionality of the replaced parts.