Sony Xperia Ray ST18I spare parts

Technical Characteristics of Sony Xperia Ray ST18I Repuestos

The Sony Xperia Ray ST18I is known for its sleek design and compact form factor. Below are the key technical characteristics of its repuestos:

• Screen Size: 3.3 inches
• Display Resolution: 854 x 480 pixels
• Processor: 1 GHz Scorpion
• RAM: 512 MB
• Internal Storage: 1 GB (upgradable via microSD)
• Rear Camera: 8.1 MP, autofocus, LED flash
• Front Camera: VGA
• Battery: 1500 mAh Li-Ion
• Operating System: Android OS, v2.3 (Gingerbread), upgradable to v4.0.4 (Ice Cream Sandwich)
• Dimensions: 111 x 53 x 9.4 mm
• Weight: 100 grams

Instructions on How to Replace Sony Xperia Ray ST18I Repuestos

Tools Needed

• Small Phillips screwdriver
• Pry tool or plastic spudger
• Tweezers
• Replacement parts (screen, battery, etc.)
• Anti-static wrist strap (optional but recommended)

Step-by-Step Replacement Guide

1. Power Off the Device

Ensure the Xperia Ray ST18I is completely powered off before starting the repair process.

2. Remove the Back Cover and Battery

Gently pry open the back cover using the pry tool. Once the cover is off, remove the battery by lifting it from the notch.

3. Remove Screws

Using a Phillips screwdriver, unscrew the screws securing the midframe. Keep the screws in a safe place as they will be reused.

4. Detach the Midframe

Carefully remove the midframe by gently prying it off with the plastic spudger.

5. Disconnect the Connectors

Using tweezers, disconnect the various connectors attached to the motherboard, such as the screen and digitizer connectors.

6. Remove the Screen

If you are replacing the screen, carefully pry it away from the main body. Be mindful of any adhesive that might be holding it in place.

7. Install the Replacement Screen

Position the replacement screen onto the main body of the phone, ensuring it aligns correctly with the connectors. Press gently to secure it in place.

8. Reconnect the Connectors

Using the tweezers, reconnect all the connectors to the motherboard. Ensure that each connector is properly seated.

9. Reassemble the Midframe

Place the midframe back over the main body and press down lightly until it snaps into place. Secure it with the screws you previously removed.

10. Reinstall the Battery and Back Cover

Place the battery back into its compartment and snap the back cover onto the phone, ensuring it is securely closed.

11. Power On and Test

Power on the device to check that the replacement part is functioning correctly. Test all functions to ensure the repair was successful.

Congratulations! You have successfully replaced the repuesto on your Sony Xperia Ray ST18I.