Sony Xperia T3 D5102 spare parts

Technical Characteristics of Sony Xperia T3 D5102 Repuestos

The Sony Xperia T3 D5102 is a mid-range smartphone known for its sleek design and reliable performance. Here are the technical characteristics of its repuestos (replacement parts):

• Display: 5.3-inch IPS LCD, 720 x 1280 pixels resolution
• Battery: Non-removable Li-Ion 2500 mAh battery
• Rear Camera: 8 MP, autofocus, LED flash
• Front Camera: 1.1 MP
• Processor: Quad-core 1.4 GHz Cortex-A7
• RAM: 1 GB
• Internal Storage: 8 GB, expandable via microSD up to 32 GB
• Operating System: Android 4.4.2 (KitKat), upgradable to 5.1.1 (Lollipop)
• Connectivity: Wi-Fi 802.11 a/b/g/n, Bluetooth 4.0, NFC, microUSB 2.0
• Dimensions: 150.7 x 77 x 7 mm
• Weight: 148 g

Instructions for Replacing Sony Xperia T3 D5102 Repuestos

Tools Required

• Plastic Pry Tool
• Suction Cup
• Phillips #00 Screwdriver
• Tweezers
• Replacement Part(s)
• Adhesive Strips

Step-by-Step Replacement Guide

1. Power Off the Device

Ensure that the Sony Xperia T3 D5102 is completely powered off before you begin the disassembly process.

2. Remove the Back Cover

Use a plastic pry tool to gently separate the back cover from the body of the phone. Start at one corner and carefully work your way around the edges until the cover is fully detached.

3. Remove the Battery

The battery is non-removable under normal conditions, but you can replace it by carefully lifting it out using the plastic pry tool. Be gentle to avoid damaging the battery pack or surrounding components.

4. Disconnect the Internal Components

Using the Phillips #00 screwdriver, remove the screws holding the internal frame and components. Disconnect the battery connector, display connector, camera connector, and other flex cables attached to the motherboard using tweezers.

5. Replace the Required Part(s)

• Display: Gently lift the old display away and place the new one, securing it with the adhesive strips.
• Battery: Place the new battery into the compartment, ensuring proper alignment with the connectors.
• Camera: Remove the old camera module and replace it with the new one, again ensuring all connectors are properly attached.

6. Reassemble the Device

Reconnect all flex cables and connectors to the motherboard. Re-secure the internal frame with the removed screws. Ensure all components are correctly installed before proceeding.

7. Reattach the Back Cover

Carefully align the back cover with the body of the phone and press around the edges to snap it back into place.

8. Power On the Device

Turn on the Sony Xperia T3 D5102 to ensure that all replacement parts are functioning correctly. Perform a quick test to verify the operability of the new components (e.g., display, camera, battery).

If everything is working as expected, you have successfully replaced the repuestos on your Sony Xperia T3 D5102.