Sony Xperia Tipo ST21I spare parts

Technical Characteristics of Sony Xperia Tipo ST21I Repuestos

The Sony Xperia Tipo ST21I is a budget-friendly smartphone, known for its simplicity and robust design. To maintain, repair, or enhance this device, it's crucial to understand the technical characteristics of its repuestos (replacement parts).

Key Replacement Parts for Sony Xperia Tipo ST21I

• Display Assembly: 3.2 inches, 320 x 480 pixels, TFT capacitive touchscreen.
• Battery: Lithium-Ion, 1500 mAh, user-replaceable.
• Motherboard: Includes CPU (800 MHz Cortex-A5), GPU (Adreno 200), and various I/O ports.
• Camera Module: 3.15 MP, 2048 x 1536 pixels.
• SIM Card Tray: Supports single SIM (Mini-SIM).
• Housing/Chassis: Plastic body with metallic finish.
• Buttons: Includes power, volume, and home buttons.

Instructions on How to Replace Sony Xperia Tipo ST21I Repuestos

Replacing the parts on a Sony Xperia Tipo ST21I can be quite straightforward if you follow these detailed steps:

1. Preliminary Steps

• Turn off the phone: Ensure the phone is powered down completely to avoid any short circuits.
• Remove the back cover: Gently pry off the back cover using a plastic opening tool to gain access to the internal components.
• Take out the battery: Carefully lift the battery out of its compartment.
• Remove SIM and SD cards: Eject both cards from their respective slots.

2. Disassembling the Phone

• Remove screws: Use a small Phillips screwdriver to remove all the screws securing the mid-frame.
• Detach the mid-frame: Use a plastic opening tool to pry the mid-frame away from the front housing.
• Disconnect connectors: Carefully disconnect any ribbon cables or connectors attached to the motherboard.

3. Replacing Specific Parts

Display Assembly

• Remove old display assembly: Carefully separate the display assembly from the housing using a plastic tool, avoiding damage to the cables.
• Install new display assembly: Align the new display assembly correctly and press it into place, ensuring the connectors snap securely.

Battery

• Remove old battery: Lift the old battery from its compartment by gently pulling on the provided tab.
• Install new battery: Insert the new battery in the same orientation and press it firmly into the compartment.

Motherboard

• Remove old motherboard: Unscrew and gently lift the motherboard out of the housing.
• Install new motherboard: Place the new motherboard into the housing, screw it in place, and reconnect all cables.

4. Reassembling the Phone

• Reconnect connectors: Ensure all ribbon cables and connectors are reattached securely to the motherboard.
• Attach mid-frame: Align and press the mid-frame back onto the phone's body, and secure it with screws.
• Insert SIM and SD cards: Place the SIM and SD cards back into their slots.
• Reinstall the battery: Put the battery back into place.
• Replace back cover: Snap the back cover onto the phone, ensuring all clips are secure.
• Power on the device: Turn on the phone to verify that everything is functioning correctly.

By following these detailed steps, you can ensure a successful replacement of parts on your Sony Xperia Tipo ST21I.