Sony Xperia X Compact F5321 spare parts

Technical Characteristics of Sony Xperia X Compact F5321 Repuestos

Display

Size: 4.6 inches
Type: IPS LCD capacitive touchscreen, 16M colors
Resolution: 720 x 1280 pixels (~319 ppi density)
Protection: Corning Gorilla Glass 4

Battery

Type: Non-removable Li-Ion 2700 mAh battery
Stand-by: Up to 710 h (2G), Up to 625 h (3G)
Talk time: Up to 14 h (2G), Up to 12 h (3G)

Camera

Primary: 23 MP, f/2.0, 24mm (wide), PDAF & laser AF
Features: LED flash, HDR, panorama
Video: 1080p@30fps, 1080p@60fps, 720p@120fps, HDR
Secondary: 5 MP, f/2.4, 22mm (wide), 1/5"" sensor

Hardware

Chipset: Qualcomm MSM8956 Snapdragon 650 (28 nm)
CPU: Hexa-core (4x1.4 GHz Cortex-A53 & 2x1.8 GHz Cortex-A72)
GPU: Adreno 510
Memory: 32GB 3GB RAM, microSD, up to 256 GB (uses shared SIM slot)

Instructions for Replacing Sony Xperia X Compact F5321 Repuestos

1. Back Cover Removal

• Power off your phone.
• Use a SIM card ejection tool to remove the SIM card tray.
• Use a plastic opening tool to carefully pry open the back cover around the edges.
• Gently lift the back cover away from the phone.

2. Battery Replacement

• Remove the screws holding the battery connector cover using a Phillips screwdriver.
• Lift the cover and disconnect the battery connector with a plastic tool.
• Gently pull the battery tab to remove the battery.
• Insert the new battery and reconnect the battery connector.
• Replace and secure the connector cover with screws.

3. Display Assembly Replacement

• Remove the battery as described in the battery replacement section.
• Disconnect the display connectors from the motherboard.
• Heat the edges of the display to soften the adhesive using a heat gun or hairdryer.
• Use a suction cup to gently lift the display. Insert a plastic card between the display and frame to separate them.
• Carefully remove the display assembly from the frame.
• Align and attach the new display to the frame, making sure all connectors are properly seated.

4. Camera Module Replacement

• Remove the back cover and battery as described in previous sections.
• Disconnect the camera module connector from the motherboard.
• Remove the screws securing the camera module.
• Gently lift and remove the camera module from the phone.
• Place the new camera module and secure it with screws.
• Reconnect the camera module connector to the motherboard.

5. Reassembling the Phone

• After replacing the necessary parts, ensure all connectors are properly reconnected.
• Reattach the back cover by aligning it with the frame and pressing down firmly until it clicks into place.
• Reinsert the SIM card tray.
• Power on the phone to test the new components.