Sony Xperia XA1 Ultra

Technical Characteristics of Sony Xperia XA1 Ultra

The Sony Xperia XA1 Ultra is a mid-range smartphone offering a combination of decent performance and a large display. Here are its key technical characteristics:

Display

• Type: IPS LCD capacitive touchscreen
• Size: 6.0 inches
• Resolution: 1080 x 1920 pixels

Platform

• OS: Android 7.0 (Nougat), upgradable to Android 8.0 (Oreo)
• Chipset: Mediatek MT6757 Helio P20
• CPU: Octa-core (4x2.3 GHz Cortex-A53 & 4x1.6 GHz Cortex-A53)
• GPU: Mali-T880MP2

Memory

• Internal: 32/64 GB
• RAM: 4 GB
• Card slot: microSD, up to 256 GB (dedicated slot)

Camera

• Main Camera: 23 MP, f/2.0, 24mm (wide), PDAF
• Features: LED flash, HDR, panorama
• Video: 1080p@30fps
• Front Camera: 16 MP, f/2.0, 23mm (wide)

Battery

• Type: Non-removable Li-Ion 2700 mAh battery

Instructions for Replacing Sony Xperia XA1 Ultra Screen

Replacing the screen on a Sony Xperia XA1 Ultra can be a delicate task. Please follow these detailed instructions carefully.

Tools Required

• Small Phillips head screwdriver
• Plastic opening tools
• Suction cup
• Tweezers
• Spudger
• Heat gun or hairdryer

Step-by-Step Instructions

Step 1: Power Off the Device

Ensure the Sony Xperia XA1 Ultra is completely powered off before you start disassembling it.

Step 2: Remove the SIM and MicroSD Cards

Use the SIM ejector tool to remove the SIM card tray and microSD card tray.

Step 3: Heating the Edges

Use a heat gun or hairdryer to gently heat the edges of the screen. This will soften the adhesive holding the screen in place.

Step 4: Lifting the Screen

Place a suction cup on the screen and gently lift to create a small gap. Insert a plastic opening tool into the gap and carefully work around the edges to separate the screen from the frame.

Step 5: Disconnect the Battery

Once the screen is lifted, you will see connectors. Use a spudger to disconnect the battery connector to avoid any electrical damage.

Step 6: Removing the Old Screen

Carefully disconnect other ribbon cables that are connected to the screen using tweezers. Once all cables are detached, remove the old screen completely.

Step 7: Install the New Screen

Connect the new screen to the motherboard by attaching the ribbon cables securely. Make sure all connections are properly seated.

Step 8: Reconnect the Battery

Reattach the battery connector to the motherboard.

Step 9: Seal the Device

Carefully place the new screen onto the device. Press around the edges firmly to ensure the adhesive sticks.

Step 10: Power On the Device

Power on the Sony Xperia XA1 Ultra to check that the screen replacement was successful and that the display is functioning properly.