Sony Xperia XA2 Ultra spare parts

Sony Xperia XA2 Ultra Technical Characteristics and Replacement Instructions

The Sony Xperia XA2 Ultra is a versatile and high-performance smartphone. Here, we provide the technical characteristics of its replaceable parts (repuestos) and step-by-step instructions for replacing these parts.

Technical Characteristics of Sony Xperia XA2 Ultra Repuestos

• Screen: 6.0 inches, 1080 x 1920 pixels resolution
• Battery: 3580 mAh, non-removable
• Camera: Dual 16 MP front camera, 23 MP rear camera
• Processor: Qualcomm Snapdragon 630
• RAM: 4 GB
• Storage: 32/64 GB, expandable via microSD up to 256 GB
• Operating System: Android 8.0 (Oreo), upgradable

Instructions for Replacing Sony Xperia XA2 Ultra Repuestos

Below are the detailed instructions for replacing various parts of the Sony Xperia XA2 Ultra:

Replacing the Screen

• Step 1: Power off the device and remove the SIM card tray.
• Step 2: Use a heat gun to heat the edges of the screen to soften the adhesive.
• Step 3: Carefully use a suction cup and a plastic pry tool to lift and separate the screen from the chassis.
• Step 4: Disconnect the display flex cable to completely detach the screen.
• Step 5: Connect the new screen by attaching the display flex cable and firmly press the new screen into place.
• Step 6: Reinsert the SIM card tray and power on the device to test the new screen.

Replacing the Battery

• Step 1: Power off the device and remove the SIM card tray.
• Step 2: Heat the back cover with a heat gun to loosen the adhesive.
• Step 3: Use a plastic pry tool to carefully lift the back cover away from the chassis.
• Step 4: Disconnect the battery connector from the motherboard.
• Step 5: Use the pull tabs or carefully pry the battery away from its adhesive.
• Step 6: Place the new battery in position and connect its connector to the motherboard.
• Step 7: Secure the back cover by pressing it firmly and uniformly against the chassis.
• Step 8: Reinsert the SIM card tray and power on the device to ensure proper functionality.

Replacing the Rear Camera

• Step 1: Power off the device and remove the SIM card tray.
• Step 2: Heat the back cover with a heat gun to loosen the adhesive.
• Step 3: Use a plastic pry tool to carefully lift the back cover away from the chassis.
• Step 4: Disconnect the rear camera flex cable from the motherboard.
• Step 5: Carefully remove the old rear camera from its housing.
• Step 6: Insert the new rear camera into the housing and connect its flex cable to the motherboard.
• Step 7: Secure the back cover by pressing it firmly and uniformly against the chassis.
• Step 8: Reinsert the SIM card tray and power on the device to test the new camera.