Sony Xperia XZ2 H8216 H8276 H8266 H8296 spare parts

Technical Characteristics of Sony Xperia XZ2 H8216 H8276 H8266 H8296 Repuestos

• Display: 5.7 inches, 1080 x 2160 pixels, HDR
• Processor: Octa-core (4x2.7 GHz Kryo 385 Gold & 4x1.7 GHz Kryo 385 Silver)
• Chipset: Qualcomm Snapdragon 845
• Memory: 4GB/6GB RAM, 64GB internal storage
• Camera: 19 MP rear camera, 5 MP front camera
• Battery: Non-removable Li-Ion 3180 mAh battery
• Operating System: Android 8.0 (Oreo), upgradable

Instructions for Replacing Sony Xperia XZ2 H8216 H8276 H8266 H8296 Repuestos

Tools Needed

• Pentalobe screwdriver
• Phillips #00 screwdriver
• Plastic opening tools
• Suction cup
• SIM card ejector tool
• Tweezers
• Replacement parts

Step-by-Step Replacement Instructions

1. Power Off the Device

Ensure that the phone is powered off to avoid any electrical damage.

2. Remove the SIM Card Tray

Use the SIM card ejector tool to remove the SIM card tray.

3. Detach the Back Cover

• 1. Use a suction cup to create a gap between the back cover and the frame.
• 2. Insert a plastic opening tool into the gap and gently work around the edges to release the clips holding the back cover.
• 3. Carefully detach the back cover, making sure not to damage the fingerprint sensor cable connected to the motherboard.

4. Disconnect the Battery

• 1. Locate the battery connector on the motherboard.
• 2. Use a plastic tool to gently pry up and disconnect the battery connector.

5. Remove the Midframe

• 1. Use a Phillips #00 screwdriver to remove the screws securing the midframe.
• 2. Carefully lift and remove the midframe.

6. Replace the Desired Repuestos

• 1. Depending on which part needs replacement (e.g., display, battery, camera), locate the part and carefully disconnect any connectors securing it to the motherboard.
• 2. Use tweezers or an opening tool to carefully remove the part.
• 3. Install the replacement part by aligning it and reconnecting any connectors.

7. Reassemble the Device

• 1. Reattach the midframe and secure it with screws removed earlier.
• 2. Reconnect the battery connector to the motherboard.
• 3. Reattach the back cover by aligning it and pressing gently until all clips snap into place.
• 4. Insert the SIM card tray back into its slot.

8. Power On the Device

Turn on the device to ensure that it functions correctly after the replacement.