Sony Xperia Z Ultra XL39H spare parts

Technical Characteristics of Sony Xperia Z Ultra XL39H Repuestos

• Display: 6.4-inch Full HD TRILUMINOS™ Display
• Resolution: 1920x1080 pixels
• Processor: Qualcomm Snapdragon 800 2.2 GHz Quad-Core
• RAM: 2GB
• Storage: 16GB internal, expandable up to 64GB via microSD
• Camera: 8 MP rear camera, 2 MP front camera
• Battery: 3050 mAh
• Operating System: Android 4.2 (Jelly Bean)
• Connectivity: Bluetooth v4.0, NFC, GPS, Wi-Fi
• Dimensions: 179.4 x 92.2 x 6.5 mm
• Weight: 212 grams

Instructions for Replacing Sony Xperia Z Ultra XL39H Repuestos

Tools Required

• Phillips screwdriver
• Plastic opening tools
• Tweezers
• Suction cup
• Spudger
• Adhesive strips (for re-sealing)
• Heat gun or hair dryer

Step-by-Step Replacement Guide

Step 1: Power Off and Remove SIM Card Tray

• Turn off your Sony Xperia Z Ultra XL39H completely.
• Insert a SIM card ejector tool into the small hole on the SIM card tray.
• Remove the SIM card tray and set it aside.

Step 2: Heating the Back Cover

• Use a heat gun or hair dryer to apply heat to the edges of the back cover. This will soften the adhesive.
• Be careful not to overheat and damage the phone.

Step 3: Removing the Back Cover

• Place a suction cup near the edge of the back cover.
• Gently pull up the suction cup while inserting a plastic opening tool between the back cover and the phone frame.
• Slide the opening tool around the edges to release the adhesive.
• Carefully lift and remove the back cover.

Step 4: Disconnecting the Battery

• Locate the battery connector and use a spudger to gently pry it off.

Step 5: Removing the Old Component

• Identify the component you need to replace (e.g., battery, screen, etc.).
• Use the Phillips screwdriver to remove any screws securing the component.
• Gently lift and disconnect the component from its connector using tweezers or a spudger.

Step 6: Installing the New Component

• Connect the new component to its connector.
• Secure it in place with screws if necessary.

Step 7: Reconnecting the Battery and Reassembling

• Reconnect the battery connector.
• Align the back cover and press it firmly onto the phone.
• Use new adhesive strips if the old adhesive is no longer sticky.
• Reinsert the SIM card tray.
• Power on the phone to test the new component.

Follow these steps carefully to ensure a successful replacement. If unsure, consult a professional technician.