Sony Xperia Z1 L39H spare parts

Technical Characteristics of Sony Xperia Z1 L39H Repuestos

The Sony Xperia Z1 L39H is known for its robust build, high-quality camera, and water-resistant features. Here are the technical characteristics of its repuestos:

• Screen: 5.0-inch TFT, capacitive touchscreen, 1080 x 1920 pixels resolution, shatterproof and scratch-resistant glass.
• Battery: Non-removable Li-Ion 3000 mAh battery.
• Camera: 20.7 MP rear camera with LED flash, front-facing 2 MP camera.
• Processor: Qualcomm MSM8974 Snapdragon 800.
• RAM: 2GB.
• Storage: 16GB internal, expandable up to 64GB via microSD card.
• OS: Android 4.2 (Jelly Bean), upgradable to 5.1 (Lollipop).
• Dimensions: 144 x 74 x 8.5 mm.
• Weight: 170 g.

Instructions for Replacing Sony Xperia Z1 L39H Repuestos

1. Replacing the Screen

Follow these steps to replace the screen:

• Power off the device and remove the SIM card tray.
• Use a heat gun to gently heat the edges of the screen to soften the adhesive.
• Use a plastic pry tool to carefully separate the screen from the frame.
• Disconnect the flex cables that connect the screen to the motherboard.
• Remove the old screen completely.
• Connect the new screen's flex cables to the motherboard.
• Carefully align the new screen and press it firmly into place.
• Power on the device to test the new screen.
• Reinsert the SIM card tray.

2. Replacing the Battery

Follow these steps to replace the battery:

• Power off the device and remove the back cover using a plastic pry tool.
• Disconnect the battery connector from the motherboard.
• Gently pry out the old battery, taking care not to puncture it.
• Insert the new battery and connect it to the motherboard.
• Replace the back cover and power on the device.

3. Replacing the Camera

Follow these steps to replace the rear camera:

• Power off the device and remove the back cover using a plastic pry tool.
• Locate the camera module and disconnect its flex cable from the motherboard.
• Unscrew and remove the camera module from the device.
• Install the new camera module and connect its flex cable to the motherboard.
• Replace the back cover and power on the device to test the new camera.

It is recommended to use high-quality replacement parts and to follow safety precautions during the replacement process. If you are not confident in performing these repairs, it is advisable to seek professional assistance.