Sony Xperia Z3 Compact d5803 spare parts

Technical Characteristics of Sony Xperia Z3 Compact D5803 Repuestos

• Model Number: D5803
• Screen Size: 4.6 inches
• Resolution: 720 x 1280 pixels
• Camera: 20.7 MP (rear), 2.2 MP (front)
• Processor: Qualcomm Snapdragon 801
• RAM: 2 GB
• Storage: 16 GB, expandable with microSD
• Battery: 2600 mAh
• Operating System: Android OS, v4.4.4 (KitKat), upgradable to v6.0 (Marshmallow)

Instructions on How to Replace Sony Xperia Z3 Compact D5803 Parts

Tools Required

• Phillips #00 Screwdriver
• Plastic Pry Tools
• Tweezers
• Adhesive Tape or Glue
• Heat Gun or Hair Dryer

Step-by-Step Replacement Guide

1. Power Off the Device

Ensure the Sony Xperia Z3 Compact is completely powered off before starting any repairs.

2. Remove the Back Cover

Use a heat gun or hair dryer to soften the adhesive around the edges of the back cover. Once the adhesive is soft, use a plastic pry tool to carefully work your way around the edges and lift the back cover off.

3. Disconnect the Battery

Identify the battery connector and use the tweezers to carefully disconnect it from the motherboard.

4. Remove the Screws

Use a Phillips #00 screwdriver to remove the screws securing the internal components. Make sure to keep track of all screws and their respective positions.

5. Disconnect Flex Cables

Use the plastic pry tool to disconnect any flex cables that are connected to the components you are replacing. Be gentle to avoid damaging the connectors.

6. Remove the Defective Part

Once all connectors and screws are removed, carefully lift out the defective part that needs to be replaced.

7. Install the Replacement Part

Place the new replacement part in the same position and carefully reconnect all flex cables. Ensure every cable is firmly seated in its connector.

8. Reassemble the Device

Replace any screws you removed earlier and make sure they are securely tightened. Reconnect the battery and ensure all components are properly aligned.

9. Reattach the Back Cover

Apply new adhesive tape or glue around the edges of the back cover. Use the heat gun or hair dryer to slightly warm the adhesive for a stronger bond. Press the back cover firmly into place.

10. Power On the Device

Power on the device to ensure the new part is functioning correctly and everything is working as expected.

By following these detailed instructions, you can successfully replace components of the Sony Xperia Z3 Compact D5803. Always work carefully and methodically to avoid damaging any parts.