Sony Xperia Z5 compact E5803 spare parts

Technical Characteristics of Sony Xperia Z5 Compact E5803 Repuestos

The Sony Xperia Z5 Compact E5803 is a flagship smartphone from Sony, known for its compact design and high performance. Here are the technical specifications of the replacement parts (repuestos) for this model:

Display

• Type: IPS LCD
• Size: 4.6 inches
• Resolution: 720 x 1280 pixels

Battery

• Type: Non-removable Li-Ion
• Capacity: 2700 mAh

Camera

• Main Camera: 23 MP
• Features: LED flash, panorama, HDR
• Video: 4K@30fps
• Selfie Camera: 5.1 MP

Memory

• Internal: 32 GB
• RAM: 2 GB
• Card Slot: microSD, up to 256 GB

Processor

• Chipset: Qualcomm MSM8994 Snapdragon 810
• CPU: Octa-core (4x1.5 GHz Cortex-A53 & 4x2.0 GHz Cortex-A57)
• GPU: Adreno 430

Instructions on How to Replace Sony Xperia Z5 Compact E5803 Repuestos

Replacing parts in the Sony Xperia Z5 Compact E5803 can be a challenging task due to its tightly packed components. Follow these detailed instructions carefully to replace any part of your device:

Tools Required

• Plastic opening tools
• Suction cup
• Tweezers
• Phillips #00 screwdriver
• Spudger

Steps to Replace the Battery

Note: Before starting, make sure the phone is turned off.

1. Use the suction cup to lift the back cover gently. If the adhesive is strong, use a heat gun to soften it.
2. Insert a plastic opening tool in the gap and slide it around to release the clips holding the back cover.
3. With the back cover removed, locate the battery.
4. Disconnect the battery connector from the motherboard using the plastic spudger.
5. Carefully lift the battery out of the phone using a plastic tool. Be cautious not to puncture the battery.
6. Insert the new battery and connect the battery connector to the motherboard.
7. Attach the back cover and press firmly until it clicks into place. Apply slight heat if necessary to make it stick better.

Steps to Replace the Display

Note: Back up important data before beginning the repair process.

1. Follow steps 1-2 from above to remove the back cover.
2. Disconnect and remove the battery as described in steps 3-5.
3. Locate and disconnect the display connector from the motherboard.
4. Use a heat gun to soften the adhesive around the edges of the front display.
5. Use a suction cup and a plastic opening tool to carefully lift and remove the display assembly.
6. Insert the new display by aligning it and gently pressing it into place. Ensure the adhesive holds firmly.
7. Reconnect the display connector to the motherboard.
8. Reconnect the battery and attach the back cover following the previous steps.

Steps to Replace the Camera

1. Remove the back cover and battery following steps 1-5 from the battery replacement section.
2. Locate the camera modules on the motherboard.
3. Use the plastic spudger to disconnect the camera connector from the motherboard.
4. Gently lift the faulty camera module out of its socket using tweezers.
5. Insert the new camera module into the socket and press it gently until it clicks into place.
6. Reconnect the camera connector to the motherboard.
7. Reconnect the battery and attach the back cover by following the previous steps.

Make sure to test the phone after each repair to ensure the replaced component is functioning correctly.