Sony Xperia Z5 E6653 spare parts

Technical Characteristics of Sony Xperia Z5 E6653 Repuestos

The Sony Xperia Z5 E6653 is known for its advanced technology and robust design. Here are some key technical characteristics of its components:

Screen Assembly

• Type: IPS LCD capacitive touchscreen
• Size: 5.2 inches
• Resolution: 1080 x 1920 pixels
• Protection: Scratch-resistant glass, oleophobic coating

Battery

• Type: Non-removable Li-Ion
• Capacity: 2900 mAh
• Stand-by: Up to 520 h (2G) / Up to 540 h (3G)
• Talk time: Up to 13 h 10 min (2G) / Up to 17 h (3G)

Camera Module

• Main Camera: 23 MP, f/2.0
• Secondary Camera: 5.1 MP, f/2.4
• Features: Geo-tagging, touch focus, face detection, HDR, panorama

Instructions for Replacing Sony Xperia Z5 E6653 Repuestos

Tools Required

• Plastic Opening Tools
• Phillips Head Screwdriver
• Tweezers
• Adhesive Strips
• Suction Cup
• Heat Gun or Hair Dryer
• Plastic Cards

Step-by-Step Instructions

Step 1: Power Off the Device

Ensure the Sony Xperia Z5 E6653 is completely powered off before starting the replacement process.

Step 2: Heat the Rear Cover

Use a heat gun or hair dryer to gently heat the edges of the rear cover. This will soften the adhesive, making it easier to remove the cover.

Step 3: Remove the Rear Cover

Place a suction cup on the rear cover and pull gently to create a gap. Insert a plastic opening tool into the gap and carefully pry the cover off. Be patient and work slowly to avoid damaging the cover.

Step 4: Disconnect the Battery

Remove any screws securing the battery connector using a Phillips head screwdriver. Carefully disconnect the battery connector using a plastic tool or tweezers.

Step 5: Remove the Screen Assembly

• Heat the edges of the screen to loosen the adhesive.
• Use a suction cup to lift the screen slightly and insert a plastic card to separate it from the frame.
• Work your way around the edges, being cautious not to damage the display cables.
• Once loosened, lift the screen assembly carefully and disconnect the display and digitizer cables.

Step 6: Replace the Desired Component

After removing the screen assembly, you can now replace the required component, whether it’s the battery, camera module, or any other internal part.

Step 7: Reassemble the Device

• Reconnect the display and digitizer cables to the motherboard.
• Carefully place the screen assembly back into the frame.
• Reconnect the battery and secure any screws if applicable.
• Apply new adhesive strips to the rear cover and press it firmly back into place.

Step 8: Test the Device

Power on the Sony Xperia Z5 E6653 and test the replaced components to ensure everything is functioning properly.