Szenio Syreni 61QHDII

Technical Characteristics of Szenio Syreni 61QHDII

Screen Size: 6.1 inches

Resolution: 2560 x 1440 pixels (QHD)

Processor: Octa-Core 2.0 GHz

RAM: 4GB

Internal Storage: 64GB (Expandable via microSD card)

Rear Camera: 16 MP

Front Camera: 8 MP

Battery: 3500 mAh

Operating System: Android 7.0 Nougat

Instructions for Replacing Szenio Syreni 61QHDII

Tools Needed:

• Plastic Spudger
• Phillips #00 Screwdriver
• Tweezers
• Plastic Opening Picks
• Adhesive Strips
• Heat Gun

Step-by-Step Replacement Process

1. Power off the Device: Ensure that the Szenio Syreni 61QHDII is powered off before starting the replacement process.

2. Remove the Back Cover:

• Use a heat gun to gently heat up the edges of the back cover. This softens the adhesive holding the cover in place.
• Insert the plastic spudger into a corner to create a small gap between the back cover and the phone frame.
• Slide the plastic opening picks around the edges to fully release the adhesive and remove the back cover.

3. Disconnect the Battery:

• Locate the battery connector on the motherboard.
• Use tweezers to carefully disconnect the battery connector.

4. Remove Screws:

• Using the Phillips #00 screwdriver, remove all screws holding down the internal components and the motherboard.

5. Disconnect and Remove the Old Screen:

• Locate the screen connector and use the spudger to disconnect it from the motherboard.
• Gently pry the screen away from the phone frame using the plastic opening picks.

6. Install the New Screen:

• Align the new screen with the phone frame and gently press it into place.
• Reconnect the screen connector to the motherboard.

7. Reassemble the Phone:

• Replace all screws and secure the internal components in place.
• Reconnect the battery connector.

8. Seal the Back Cover:

• Apply adhesive strips around the edges of the back cover.
• Gently press the back cover onto the phone frame, ensuring it is properly aligned and sealed.

9. Power on the Device: Power on the Szenio Syreni 61QHDII to ensure that the new screen is functioning correctly.