TCL 10 5G T790Y spare parts

TCL 10 5G T790Y Specs

The TCL 10 5G T790Y is a powerful smartphone featuring several high-end specifications. Below are some of the key specifications:

• Display: 6.53" full HD+ LCD
• Processor: Qualcomm Snapdragon 765G
• Memory: 6GB RAM
• Storage: 128GB, expandable via microSD card
• Battery: 4500mAh
• Camera: Quad camera setup with 64MP main camera
• Operating System: Android 10

Replacing TCL 10 5G T790Y Repuestos (Spare Parts)

Tools Required

Before we start, ensure you have these necessary tools:

• Small Phillips-head screwdriver
• Spudger tool or plastic opening pry tool
• Tweezers
• Clamps

Steps to Replace TCL 10 5G T790Y Repuestos

Follow the detailed steps below to replace the TCL 10 5G T790Y repuestos.

• Turn off the phone before starting the replacement process. This ensures no damage is done to the internal components.
• Use the spudger or plastic opening tool to gently pry off the back cover from the bottom edge, moving around the sides of the device.
• Remove the screws attaching the protective plate to access the battery and other internal components.
• Again, use the spudger to disconnect the battery connector from the motherboard.
• If you're replacing the battery, simply lift and remove the old one with the spudger or tweezers. If you're replacing other parts, disconnect the necessary connectors and screws attaching them, and carefully remove the faulty part.
• Place the new replacement part into the respective slot and reconnect the connectors or screws as necessary.
• Reconnect the battery connector to the motherboard and place the protective plate back in the phone, tightening the screws to secure it.
• Finally, clip the back cover onto the phone's frame, ensuring it fits securely around all corners and edges.
• Switch on the phone to test if the new part is working correctly.

Remember to take your time during the process to avoid causing additional harm to your device. If at any point you feel uncomfortable performing these tasks, seek professional help.