TCL 10 Plus T782H spare parts

TCL 10 Plus T782H Technical Specifications

The TCL 10 Plus T782H offers a host of powerful features to make it a compelling choice for mobile users. To help ensure we are providing the correct steps for parts replacement, it's important to note some of the major specifications, including:

• Display: 6.47" FHD+
• Processor: Qualcomm Snapdragon 665
• OS: Android v10.0
• Memory: 6GB RAM, 128GB internal storage
• Battery: 4500mAh
• Camera: Quad camera with 48MP Main, 5MP Macro, 2MP Depth, and 2MP Lowlight plus 16MP Front camera

Replacement Process for TCL 10 Plus T782H Mobile Phone Parts

Replacement of parts should be done with great care. Follow these instructions to replace the parts carefully.

Tools Needed:

• Spudger
• Screwdriver
• Pry tool

Instructions:

Step 1: Removing the Back Panel

• First, shutdown the device.
• Carefully loosen the edges of the back cover using the Spudger and Pry tool.
• Once loosened, remove the back cover to expose the interior of the device. Always be cautious to avoid scratching or damaging the internals with the tools.

Step 2: Disconnecting the Battery

• Find the connector that links the battery to the phone's motherboard.
• Using your Spudger, gently disconnect the battery's connector.

Step 3: Replacing the Desired Parts

• Locate the component you wish to replace (e.g., display, camera).
• If the component is screwed in place, use the Screwdriver to carefully remove the screws then lift the component out with your Pry tool or Spudger.
• Replace the part, making sure you place it correctly within its designated spot.

Step 4: Reassembling the Device

• Reconnect the battery connector to the phone's motherboard.
• Finally, secure the back panel by pressing down carefully around the edges until it clicks into place.

Please note, the above instructions might vary slightly depending on the exact model and part being replaced. Always handle the electronic components with care to avoid damage.