TCL 30 Plus spare parts

TCL 30 Plus Repuestos Technical Characteristics

The TCL 30 Plus is a versatile smartphone with a range of parts, referred to as repuestos, that contribute to its high performance and reliability.

• Screen: The TCL 30 Plus features an IPS LCD capacitive touchscreen with 16M colors.
• Battery: The device is powered by a non-removable Li-Po 5000 mAh battery.
• Camera: It boasts a triple rear camera system, with 48 MP (wide), 2 MP (macro), and 2 MP (depth).
• Processor: The smartphone operates with a Mediatek MT6762 Helio P22 (12 nm) processor.
• Memory: It has 128GB of built-in storage, with 4GB of RAM.

Instructions To Replace TCL 30 Plus Repuestos

Please ensure you have the correct replacement parts for the specific repuesto you intend to replace.

Screen Replacement

Follow these steps to replace a damaged screen:

• Power off the device and remove the SIM card tray.
• Heat the edges of the screen to loosen the adhesive.
• Use a suction cup and pry tool to carefully lift the screen from the frame.
• Disconnect the screen connector from the motherboard.
• Place the new screen and connect it to the motherboard.
• Reattach the screen to the frame and turn on your device to test the new screen.

Battery Replacement

To replace a worn-out battery:

• Turn off the TCL 30 Plus and use a SIM card ejector tool to remove the SIM card tray.
• Use a heat gun to soften the adhesive holding the back plate.
• Place a new battery and connect it to the motherboard.
• Seal the back cover using an adhesive.

Camera Replacement

If the camera is faulty, you can replace it as follows:

• Switch off your TCL 30 Plus and remove the rear cover using a pry tool.
• Remove the protective bracket that covers the connector for the camera.
• Disconnect the faulty camera module and replace it with the new one.
• Reconnect the camera connector to the motherboard.
• Replace the back cover and turn on the phone to test the new camera.

Please remember these repairs should only be conducted by a skilled technician to avoid further damage to the device.