TCL 30 SE spare parts

TCL 30 SE Technical Specifications

The TCL 30 SE comes with a number of distinctive technical characteristics that allow it to stand out in the market.

• OS: The TCL 30 SE uses Android 11
• Display size: It boasts of a 6.82-inch display
• Processor: It uses the MT6762D/W processor
• Storage: The phone comes with 3GB of RAM and 32GB of internal storage
• Battery: It uses a 5000mAh battery
• Camera: The phone has a 13+2MP dual rear camera and a 5MP front camera

Instructions for replacing TCL 30 SE parts

Below are general guidelines with respect to replacing parts in the TCL 30 SE.

It's always recommended to store all small pieces in a safe place while during replacement, to avoid losing any components. Also, ensure the device is powered off before starting the replacement process.

Screen Replacement

• Start by removing any casing or protector on your phone if any.
• Heat the edges of the screen using a heat gun or a hairdryer, to help melt the adhesive.
• Use a suction cup to gently pull up the screen's glass while using a pry tool to separate it from the frame. Be careful not to damage any internal circuits.
• Once the screen is separated, remove any connecting cables or ribbons, replacing the screen with a new one. Start the reassembly process by fixing the cables back, then the screen onto the frame using adhesive.

Battery Replacement

• After removing the screen as above, locate the battery in the back frame of the phone.
• Disconnect any connectors from the motherboard attached to the battery and remove any tape or bolts keeping the battery in place.
• Using a plastic pry tool, gently lift the battery from its seating. Be careful not to damage the adhesive beneath.
• Place the new battery in, reattach the connectors, and secure it in place before putting the screen back together.

Note: Always seek professional help if you're unsure about the process, to avoid causing further damage to your smartphone.