Thl Mobile touch screen

Technical Characteristics of Thl Mobile Pantalla Táctil

The Thl Mobile pantalla táctil is an advanced touch screen designed for Thl Mobile smartphones. Here are its technical characteristics:

• Screen Size: 5.0 inches
• Resolution: 720 x 1280 pixels
• Type: Capacitive touchscreen
• Colors: 16M colors
• Protection: Corning Gorilla Glass
• Multi-touch: Yes
• Aspect Ratio: 16:9

How to Replace Thl Mobile Pantalla Táctil

Tools Needed

• Small Phillips screwdriver
• Plastic opening tools
• Spudger
• Suction cup
• Adhesive strips or glue
• Replacement pantalla táctil for Thl Mobile

Step-by-Step Instructions

1. Power Off the Device

Ensure the Thl Mobile phone is powered off before starting the replacement process to avoid any electrical damage.

2. Remove the Back Cover and Battery

Using the plastic opening tool, gently pry open the back cover of the device. Remove the battery by lifting it out from the compartment.

3. Unscrew the Mid-Frame

Remove all visible screws from the mid-frame of the device using a small Phillips screwdriver. Keep the screws in a safe place as you will need them later.

4. Detach the Mid-Frame

Use the spudger or plastic opening tool to carefully detach the mid-frame. Be gentle to avoid snapping the plastic components.

5. Disconnect the Display Cables

Locate the display cables connected to the motherboard. Use the spudger to lift the connector tabs and disconnect the cables from the motherboard.

6. Remove the Broken Screen

Place a suction cup on the front screen of the device. Apply gentle, but steady pressure to lift the broken screen from the device’s frame. If necessary, use the plastic opening tools to assist in prying the screen off.

7. Clean the Frame

Ensure that there are no remnants of adhesive or broken glass on the device frame. Clean it thoroughly to prepare it for the new screen installation.

8. Install the New Pantalla Táctil

Place the new pantalla táctil carefully onto the device frame. Ensure it aligns properly with the connectors and fits snugly.

9. Reconnect the Display Cables

Reconnect the display cables to the motherboard, securing the connector tabs back into place.

10. Reassemble the Phone

Reattach the mid-frame to the device and screw it back in using the small Phillips screwdriver. Insert the battery back into its compartment.

11. Secure the Back Cover

Snap the back cover back onto the device, ensuring all edges are securely in place.

12. Power On the Device

Turn on the Thl Mobile phone to check if the new pantalla táctil is functioning correctly. Test the touch responsiveness thoroughly.

Congratulations! You have successfully replaced the Thl Mobile pantalla táctil.