THL W100 W100S spare parts

    There are 2 products.

    Technical Characteristics of THL W100 W100S Repuestos

    The THL W100 W100S repuestos comprises of the following key features:

    • Screen: 4.5 inch IPS multi-touch capacitive screen with a 960x540 pixel resolution.
    • Processor: Quad-core 1.2GHz (Mediatek MTK6589 chipset).
    • RAM: 1GB.
    • Storage: 4GB internal storage, expandable by up to 32GB via a microSD ca...

    Technical Characteristics of THL W100 W100S Repuestos

    The THL W100 W100S repuestos comprises of the following key features:

    • Screen: 4.5 inch IPS multi-touch capacitive screen with a 960x540 pixel resolution.
    • Processor: Quad-core 1.2GHz (Mediatek MTK6589 chipset).
    • RAM: 1GB.
    • Storage: 4GB internal storage, expandable by up to 32GB via a microSD card.
    • Camera: 5.0MP (back camera) and 5.0MP (front camera).
    • Battery: 1800mAh Li-ion battery.
    • Operating System: Android 4.2 Jelly Bean.

    Instructions for Replacing THL W100 W100S Repuestos

    Tools Needed

    • A plastic opening tool
    • A small Phillips screwdriver
    • Tweezers (optional)

    Step 1: Power Off

    Before starting manipulation, please ensure the device is powered off to avoid any short circuit or harm.

    Step 2: Removing the Back Cover

    Use the plastic opening tool to gently pry off the back cover around the edges of the phone until it loosens and can be removed.

    Step 3: Removing the Battery

    Once the back cover is off, remove the battery from the phone by lifting it out gently.

    Step 4: Removing the Screws

    Using the Phillips screwdriver, remove all the visible screws from the back of the device.

    Step 5: Removing Circuit Board Cover

    After all screws are removed, use the plastic opening tool to remove the circuit board cover.

    Step 6: Disconnecting Flex Cables

    Identify the flex cables connecting different parts of the phone. Use the tweezers to gently disconnect these flex cables from the board.

    Step 7: Replacing Components

    Now you have access to replace the required components of the phone. After replacing the parts, carefully reconnect the flex cables back to the board.

    Step 8: Reassemble the Phone

    Starting from step 5, follow the instructions in reverse order to reassemble the phone.

    Step 9: Power On

    Once the phone is fully reassembled, power it on to make sure everything is working correctly.

    Note

    It is recommended to follow these instructions in a clean, well-lit area with a tray or container for keeping track of screws and small parts.

    Less
    More
    Showing 1 - 2 of 2 items