THL W11 spare parts

Technical Specifications of THL W11 Repuestos

The THL W11 repuestos are the replacement components for THL W11 smartphone. Here's an overview of the device's technical specs:

• Display: 5.0 inch, 1920x1080 pixel FHD screen
• Processor: Octa-core 1.7 GHz Cortex-A7
• Memory: 2 GB RAM, 32 GB internal storage
• Operating System: Android 4.2 Jelly Bean
• Battery: Non-removable Li-Ion 2300 mAh
• Camera: 13 MP, autofocus, LED flash

How to Replace THL W11 Repuestos

Follow the instructions below for a successful replacement of THL W11 components. It’s recommended to have a basic understanding of smartphone assembly before proceeding.

Pre-Replacement Steps

• Switch off the device: Before opening your device for replacement, ensure it is powered off properly.
• Prepare your tools: Ensure to have a mobile phone opening toolkit. This toolkit usually comes with a screwdriver, tweezers, plastic pry tools, and a suction cup.

Step-by-step Replacement Procedure

Follow the steps below carefully:

• Remove the back cover: Using the plastic pry tool from your toolkit, gently wedge the edge of the tool into the seam between the phone frame and the back cover. Slide the tool around the edges to release the clips that hold the cover in place.
• Remove the battery: After removing the back cover, you’ll see the battery. Lift it out carefully.
• Remove the protective metal sheet: There will be several small screws that hold the protective shield (covers the motherboard) in place. Use the appropriate screwdriver from your toolkit to remove these screws and lift off the shield.
• Detach the defective component: Identify the faulty part that needs replacement, like the camera, speaker, or motherboard. Carefully disconnect these from their positions using your pry tool or tweezers.
• Installing the new component: Position the new part onto the phone and connect it as it originally was. Ensure that it fits perfectly.
• Re-install the protective sheet: Place back the protective shield and tighten the screws.
• Re-insert the battery: Place the battery back into its compartment.
• Attach the back cover: Clip the back cover into place to complete the replacement process.

Note: If unsure about this procedure, it's best to have a professional handle the replacement for you.