THL W3 spare parts

Technical Characteristics of THL W3 Repuestos

The THL W3 Repuestos are the replacement parts for the THL W3 smartphone device. Some of the most common replacement parts and their technical characteristics are as follows:

• Display:
  The THL W3's display repuesto (replacement part) is a 4.5-inch IPS LCD with a resolution of 1280x720 pixels.
• Battery:
  The battery repuesto is a lithium-ion battery that carries a capacity of 2000mAh.
• Camera:
  The camera repuesto is an 8MP rear camera with an LED flash and auto-focus capabilities.
• Ram and Storage:
  The RAM repuesto is a 1GB DDR3 RAM, and the Storage repuesto is 4GB ROM, which is also expandable up to 32GB through a microSD slot.

Replacing the THL W3 Repuestos

Materials Needed

The following materials are needed for the replacement process:

• Precision screwdrivers
• Pry tool
• New repuesto parts

Procedure

Please ensure that you follow the steps outlined below to safely replace the THL W3 Repuestos:

1. Step 1: Power off the THL W3 smartphone and remove the back cover and battery.
2. Step 2: Use the precision screwdriver to remove all screws securing the phone's case.
3. Step 3: Use the pry tool to carefully remove the case. Be careful not to damage any components.
4. Step 4: Identify the part that needs replacing. If it is a part that is plugged into the motherboard, gently unplug it.
5. Step 5: Replace the broken part with your new repuesto (replacement part).
6. Step 6: If the replaced part needed to be connected to the motherboard, reattach it carefully.
7. Step 7: Reassemble your phone by following these same directions in reverse order.

Note: Always make sure the new parts match the old ones. Remember, the main aim is to be as gentle as possible with the components of the device during the process. Doing so will increase the life of your device.