THL W6 spare parts

    There is 1 product.

    Technical Characteristics of THL W6 Repuestos

    THL W6 Repuestos are replacement parts for the THL W6 smartphone. They are essential for maintaining and restoring the phone's functionality.

    Technical Details

    • Screen: 5.3-inch IPS 960x540 pixels, capacitive touch.
    • Battery: 3.7V, Li-ion polymer battery, capacity of 2300mAh.
    • Rear and Front Camera Re...

    Technical Characteristics of THL W6 Repuestos

    THL W6 Repuestos are replacement parts for the THL W6 smartphone. They are essential for maintaining and restoring the phone's functionality.

    Technical Details

    • Screen: 5.3-inch IPS 960x540 pixels, capacitive touch.
    • Battery: 3.7V, Li-ion polymer battery, capacity of 2300mAh.
    • Rear and Front Camera Repuestos: 8.0MP and 0.3MP respectively.
    • System Board: Compatible with Android 4.0 system.

    Instructions To Replace THL W6 Repuestos

    Before starting, it's important to note these instructions require precision and patience. Proceed with caution and at your own risk. Certain repairs may require professional expertise.

    General Steps

    1. Turn off the device and ensure it is not connected to a power source.
    2. Remove the back cover forcefully, starting from the top or bottom corner, depending on the design.
    3. Remove the battery carefully.

    Screen Replacement

    1. Dismount the old screen by removing any screws. (This step may vary depending on the model of your phone.)
    2. Cautiously unplug the connector and remove the old screen.
    3. Plug in the new screen connector and secure the screen with the screws.

    Battery Replacement

    1. Pull up on the adhesive or tab to remove the battery.
    2. Insert the new battery and press firmly until it sticks to the adhesive.

    Camera Replacement

    1. Locate the connector for the front/rear camera and carefully disconnect it.
    2. Insert the new camera and reconnect the connector.

    System Board Replacement

    1. Carefully locate the motherboard and remove any screws.
    2. Disconnect any cables attached to the board.
    3. Insert the new board, reconnect the cables, and secure with screws.

    After all replacements are made, reassemble back the battery and the back cover of the phone. Turn on the device to confirm the functionality of the new repuestos.

    Less
    More
    Showing 1 - 1 of 1 item