Ulefone Armor 24 spare parts

    There are 21 products.

    Technical Characteristics of Ulefone Armor 24 Repuestos

    The Ulefone Armor 24 component parts offers a high level of durability and performance which is suitable for its rugged design. Here are some of its characteristics:

    • Display: 6.1-inches with a resolution of 720 x 1560 pixels.
    • Battery: 5180mAh, non-removable Lithium-Polymer.
    • Per...

    Technical Characteristics of Ulefone Armor 24 Repuestos

    The Ulefone Armor 24 component parts offers a high level of durability and performance which is suitable for its rugged design. Here are some of its characteristics:

    • Display: 6.1-inches with a resolution of 720 x 1560 pixels.
    • Battery: 5180mAh, non-removable Lithium-Polymer.
    • Performance: Powered by a MediaTek MT6762D processor.
    • Ram Memory: 4GB RAM.
    • Internal Storage : Up to 64GB storage capacity.
    • Camera: Dual Rear Camera setup – 13MP main sensor, 2MP secondary sensor and 8MP front-facing camera.

    Instructions for Replacing Ulefone Armor 24 Repuestos

    Below are the detailed steps for replacing various component parts (Repuestos) of Ulefone Armor 24:

    Preparation

    Before you begin any repairs, prepare a clean, well-lit workspace. Refer to a device-specific repair guide for a list of recommended tools and parts.

    Step 1: Power Off the Device

    • Press and hold the side button until the shut-down menu appears. Then select power off.

    Step 2: Remove the Back Cover

    • Remove the screws securing the back cover using a relevant screwdriver.

    Step 3: Detach the Battery

    • Unplug the battery connector located near the top right corner of the device.
    • Carefully lift the battery out of the device, paying attention not to puncture or bend the battery.

    Step 4: Replace Desired Parts

    • Depending on which component you want to replace, proceed to disconnect the relevant connectors and remove the screws using the screwdriver. (E.g, for replacing the screen, disconnect the screen connector, and unscrew the frame.)

    Step 5: Reassemble Your Ulefone Armor 24

    • After replacing the desired parts, reassemble the device in the reverse order of how you disassembled it.
    • Double-check to ensure all connectors are plugged in and screws are tightened.
    • Finally, power the device on to check its functionality.

    Note: Remember to only conduct repairs that you feel comfortable with, as any damage done during repairs can lead to further device issues. It's recommended to get help from a professional technician.

    Less
    More
    Showing 1 - 21 of 21 items