Ulefone Armor 6 spare parts

Technical Specifications of Ulefone Armor 6 Repuestos

The Ulefone Armor 6 repuestos are the supplementary elements of the rugged Ulefone Armor 6 smartphone. The smartphone's technical details include:

• 6.2-inch IPS LCD capacitive touchscreen
• 1080 x 2246 pixels resolution
• Corning Gorilla Glass 5 protection
• Octa-core (4x2.0 GHz & 4x2.0 GHz)
• 6GB of RAM
• 128GB Internal storage expandable up to 256GB via a MicroSD
• Dual 21 MP +13 MP rear cameras
• 13 MP front-facing camera
• 5000 mAh non-removable battery
• Fingerprint (side-mounted) and facial recognition

Instructions for replacing Ulefone Armor 6 Repuestos

Follow the instructions below to replace your Ulefone Armor 6 phone parts:

Tools required

• Screwdriver
• Plastic opening tools
• Tweezers
• Heat gun or hair dryer

Steps

1. Turn off the Armor 6 phone and remove the SIM card tray.

2. Use the heat gun or hairdryer to heat the edges of the back cover, then use a plastic opening tool to create an initial gap to insert the opening pick.

3. Lift the back cover cautiously. It is connected to the phone body by a short ribbon cable.

4. Remove the screw using the screwdriver and then disconnect the ribbon cable connected to the back cover. Set the back cover aside.

5. Remove all screws you can see in order to lift the plastic sheet covering the motherboard.

6. After lifting the plastic cover, disconnect all the visible ribbon cables connected to the motherboard.

7. Carefully lift the motherboard from the phone body.

8. Now, remove the battery or other damaged parts and replace them with the new ones.Make sure to connect any cables or connectors associated with the new parts.

9. Follow the steps above in reverse order to reassemble your Ulefone Armor 6.

Note:

When replacing parts, make sure they are designed for the Ulefone Armor 6, as parts from other models may not be compatible.