Ulefone Armor 8 spare parts

Ulefone Armor 8 Repuestos Technical Specifications

The Ulefone Armor 8 features a sturdy design, suitable for heavy-duty applications. The Armor 8 offers impressive repairability with readily available replacement parts. Here are some technical specifications:

• Screen: 6.1-inch IPS display, 720 x 1560 pixels resolution
• Processor: Mediatek Helio P60 Octa-core
• RAM & Storage: 4GB RAM and 64GB internal storage (expandable up to 256GB via SD card)
• Battery: 5580mAh Battery with Quick Charging
• Camera: Triple camera setup: 16MP Wide, 5MP Macro and 2MP Depth sensor

Instructions for Replacing Ulefone Armor 8 Repuestos

Replacing the parts of the Ulefone Armor 8 requires patience and precision. Here is the step by step guide:

Tools Needed

• Screwdriver (1.5mm Hex)
• Spudger
• Precision Tweezer

Steps

1. Power off the device before beginning the repair operation.
2. Remove all the screws on the back of the phone using the 1.5mm screwdriver.
3. With the screws removed, use the spudger to gently pry open the back case of the phone. Be careful not to apply too much force as it may break some plastic tabs inside.
4. Once the back case has been removed, carefully unplug the battery connector and the flex cables connected to the motherboard.
5. Remove the screws securing the motherboard and lift the board out carefully, to avoid damaging any attached cables.
6. With the motherboard removed, you would now have access to the screen, camera, and other components for replacement.
7. Replace the damaged components with the new ones, ensuring they fit properly and all connectors are secured in place.
8. Reassemble the phone by going through these steps in reverse, making sure all screws are fully tightened, and the back case clips securely in place.
9. Once the phone is assembled, power on to check if all parts are working correctly.

Note: Always use genuine parts for replacements to ensure compatibility and longevity of your Ulefone Armor 8.