Ulefone Armor 9 spare parts

Technical Characteristics of Ulefone Armor 9 Repuestos

The Ulefone Armor 9 is a rugged smartphone designed for tough environments. The "repuestos," or replacement parts, are built to handle harsh conditions as well.

Ulefone Armor 9 Screen

The Armor 9 features a 6.3 inch IPS LCD screen with a resolution of 1080 x 2340 pixels.

Processor and RAM

This rugged smartphone is powered by a MediaTek Helio P90 (MT6779) processor, complemented by 8GB of RAM for swift multitasking.

Battery

To replace the battery, you will need a specific one compatible with Ulefone Armor 9, a 6600mAh non-removable battery.

Instructions for Replacing Ulefone Armor 9 Repuestos

Below are the step by step instructions on how to replace Ulefone Armor 9 repuestos.

Tools Needed

• Small Phillips Screwdriver
• Plastic Pry Tool
• Pair of Tweezers

Screen Replacement

Here are the steps to follow when replacing the screen of the Ulefone Armor 9 phone:

• First, make sure the device is powered off.
• Next, remove the back cover screws using a small Phillips screwdriver.
• Gently pry off the back cover using a plastic pry tool.
• Disconnect the battery connector.
• Remove the screws securing the screen connector and disconnect it.
• Carefully remove the damaged screen.
• Place the new screen onto the device frame and re-connect the screen connector.
• Re-install the screws to secure the screen connector.
• Re-connect the battery connector.
• Re-attach the back cover and re-install the screws.
• Power on the device to check the display functionality.

Battery Replacement

To replace the battery, follow these steps:

• Ensure the device is powered off.
• Remove the back cover screws using a small Phillips screwdriver.
• Using the pry tool, gently pry off the back cover.
• Disconnect the battery connector and remove the screws securing the battery down.
• Using a pair of tweezers, lift up the battery and gently remove it
• Place new battery in the phone and secure it with screws.
• Re-connect the battery connector, replace the back cover and screws.
• Power on the device to test the new battery.