Ulefone Armor X8 spare parts

Ulefone Armor X8 Repuestos Technical Specifications

The Ulefone Armor X8 is a rugged and strong smartphone that offers great performance. It features:

• Screen: 5.7 inches IPS, HD+, 720 x 1440 pixels
• Processor: MediaTek Helio A25 MT6762V/WD
• Memory: 4GB RAM, 64GB ROM
• Camera: Rear - 13MP + 2MP + 2MP, Front - 8MP
• OS: Android 10
• Battery: 5080mAh

Instructions on How to Replace Ulefone Armor X8 Repuestos

Before replacing any parts (repuestos), make sure that you've switched off your device.

Replace touch panel and LCD screen:

• Make sure that you've got a new compatible Ulefone Armor X8 repuestos screen.
• Using a heat gun, warm around the edges of the screen to soften the adhesive.
• With a suction cup and a pry tool, carefully lift the old screen off.
• Remove all old adhesive and clean the area.
• Apply new adhesive - do it carefully as the adhesive can harm your LCD if not applied correctly.
• Carefully place the new screen onto the phone. Make sure it properly aligns with the device.

Replacing the Battery:

• Firstly, make sure that you've got a new battery compatible with the Ulefone Armor X8.
• After removing the screen, remove the shields that cover the battery connector on the motherboard.
• Disconnect the battery connector.
• Remove any screws holding the battery in place and carefully lift the battery out of the phone.
• Place the new battery, re-attach the connector and put back the screw and shield.
• Re-assemble the screen following the steps mentioned above.

Please use this guide at your own risk. We're not responsible for any damage you could cause to your device during the replacement process.