Ulefone Be Touch 2 spare parts

    There are 3 products.

    Technical Characteristics of Ulefone Be Touch 2 Repuestos

    The Ulefone Be Touch 2 is a stylish and modern smartphone boasting an array of impressive technical features. Before we proceed with the replacement instructions, it is crucial to understand the key elements of Ulefone Be Touch 2 Repuestos:

    • Screen: 5.5-inch full HD IPS display with 1...

    Technical Characteristics of Ulefone Be Touch 2 Repuestos

    The Ulefone Be Touch 2 is a stylish and modern smartphone boasting an array of impressive technical features. Before we proceed with the replacement instructions, it is crucial to understand the key elements of Ulefone Be Touch 2 Repuestos:

    • Screen: 5.5-inch full HD IPS display with 1080x1920 pixels resolution and Corning Gorilla Glass 3 for added toughness.
    • Processor: Powered by an Octa-Core MediaTek MT6752 processor clocked at 1.7 GHz, and Mali-T760 GPU.
    • Storage: 16 GB of internal storage with an option to expand up to 64 GB via micro SD card.
    • RAM: 3 GB for smooth and efficient functioning.
    • Battery: 3050 mAh battery that can be replaced by the user.
    • Camera: 13 MP rear camera with flash and a 5 MP front camera.

    Instructions for Replacing Ulefone Be Touch 2 Repuestos

    Tools Needed

    To proceed with the replacement process, you will need the following tools:

    • Small Phillips screwdriver
    • Plastic opening tools
    • Tweezers
    • ESD-safe tweezers
    • New Ulefone Be Touch 2 repuestos

    Disassembling the Phone

    • Power off the device by holding the Power button.
    • Remove the back cover by gently prying it off with the plastic opening tool.
    • Remove the screws from the rear panel using the Phillips screwdriver. Make sure to store these safely as they're tiny and easy to lose.
    • Disconnect the battery by gently removing the connector.

    Installing the New Repuestos

    • Remove the Old Repuestos: Carefully lift the old Repuestos and unplug any connectors attached.
    • Installing the New Repuestos: Connect the new Repuestos and carefully position it into its respective place.
    • Reconnect the Battery: Reconnect the battery back to its connector on the motherboard.
    • Reassemble the Phone: Screw the rear panel using the screws you removed earlier.
    • Fit the Back Cover: Finally, fit the back cover on the phone by pressing it gently until it clicks into place.

    Once you have followed all these steps, you should have successfully replaced the Repuestos on your Ulefone Be Touch 2. Remember to always proceed with caution to avoid damaging the device.

    Less
    More
    Showing 1 - 3 of 3 items