UMI F1 Play spare parts

UMI F1 Play Repuestos Technical Specifications

The UMI F1 Play smartphone incorporates high-end features that makes it a viable choice for smartphone enthusiasts. Here are the integral components:

• Display: 6.3 inch 2340x1080 FHD+
• Processor: Helio P60 Octa Core, 2.0GHz
• RAM: 6GB
• Storage: 64GB, expandable upto 256GB
• Battery: 5150mAh, Fast Charge Support
• Camera: 48MP + 8MP rear, 16MP front
• OS: Android 9.0 Pie

UMI F1 Play Repuestos Replacement Guide

Follow the below steps for successful replacement process:

Tools Required

• Small Phillips Screwdriver
• Small Flathead Screwdriver
• Plastic Pry Tool
• Eject Pin

Steps for Replacement

Note: Ensure your phone is switched off and disconnected from any power source before starting.

1. Remove the SIM card tray using the Eject Pin.
2. Unscrew the two screws at the base of the phone with a Phillips Screwdriver.
3. Use a Plastic Pry Tool to separate the back cover from the phone. Apply gentle pressure and move along the edges.
4. Locate the battery connector and unplug it.
5. Unscrew and remove the protective metal plate over the ribbon cable connector.
6. Unplug the ribbon cable that connects the battery to the motherboard.
7. Remove the old battery.
8. Place the new battery and reconnect the ribbon cable and the battery connector.
9. Screw back the protective metal plate over the ribbon cable connector.
10. Replace back the cover carefully. Apply gentle pressure to snap in the cover.
11. Replace the two screws at the base of the phone.
12. Insert back the SIM card tray.

Turn on your phone to check if the new parts are working properly.

Caution

Ensure to handle the internal components of the phone with caution. Any forced pressure can result in permanent damage.