UMI Touch spare parts

Technical Characteristics of UMI Touch Repuestos

The UMI Touch is a versatile smartphone known for its robust design and impressive features. Here is a comprehensive look at the key technical features of the UMI Touch repuestos (replacement parts).

• Screen: 5.5-inch full HD, 1920x1080 resolution, IPS technology
• Processor: Mediatek MT6753 Octa-Core 1.3 GHz
• RAM: 3 GB RAM
• Storage: 16 GB internal memory, expandable with micro SD card
• Battery: 4000 mAh
• Operating System: Android 6.0 Marshmallow
• Camera: 13 MP rear camera; 5 MP front camera
• Connectivity: Supports 4G, Wi-Fi, Bluetooth 4.1, GPS

Instructions for Replacing UMI Touch Repuestos

Tools Needed

Before beginning, ensure you have the following tools:

• Small Phillips screwdriver
• Plastic opening tools
• Tweezers

Screen Replacement Procedure

Here are step-by-step instructions to guide you through the screen replacement process:

• Turn off the UMI Touch Smartphone.
• Remove the SIM card and SD card.
• Unscrew the two screws at the bottom of the device using the Phillips screwdriver.
• Use the plastic opening tool to gently pry open the back cover starting from the bottom edge.
• Unscrew the 10 screws holding the internal cover, then remove the cover.
• Disconnect the battery connector using the tweezers.
• Next disconnect the display connector.
• Now you can safely remove the broken screen.
• Replace the new screen and reconnect the display connector.
• Reconnect the battery connector.
• Replace the internal cover and fasten the screws.
• Re-attach the back cover.
• Re-insert your SIM and SD card.

Make sure to perform each step carefully and patiently to avoid causing further damage to the phone.

Note: This is a general guideline for UMI Touch repuestos replacement and it may somewhat vary depending on the model.