Umidigi Power 3 spare parts

Technical Characteristics of Umidigi Power 3 Repuestos

The Umidigi Power 3 Repuestos is a significant component of the Umidigi Power 3 smartphone model. Here's an outline of the major technical specifications:

• Screen: 6.53" FHD+ FullView Display
• Battery: 6150mAh, Supports 18W Fast Charge
• RAM: 4GB
• Storage: 64GB, expandable up to 256GB
• Processor: MediaTek, Helio P60, 8-core, Up to 2.0GHz
• Operating System: Android 10
• Camera: Quad Camera, 48MP + 13MP + 5MP + 5MP

Replacing Umidigi Power 3 Repuestos

Tools Needed

• Screwdriver set
• Plastic opening tools
• Gloves
• Replacement parts for Umidigi Power 3

Step-by-Step Instructions

Before you start, be sure to power off the device and remove the SIM tray.

• Step 1: Use a plastic opening tool to gently pry open the back cover from the bottom of the device. Work your way around the edges until the back cover is completely detached.
• Step 2: Unscrew all visible screws using the appropriate screwdriver.
• Step 3: Slowly lift the frame from the bottom using the plastic opening tool. Be cautious not to yank it off as it's connected by several cables.
• Step 4: Disconnect the battery connector and other connectors that are connected to the logic board.
• Step 5: Remove the logic board, and you will have full access to replace the faulty component(s).
• Step 6: Replace the faulty part with the new replacement Umidigi Power 3 Repuestos.
• Step 7: Reconnect any cables that had been disconnected and re-insert the logic board.
• Step 8: Screw back the visible screws and reattach the back cover firmly.
• Step 9: Insert the SIM card tray and turn on the device to check functionality.

Please note that this is a general guide and the process can vary depending on the exact replacement part. Always refer to device-specific resources whilst carrying out the replacement.