Umidigi S3 Pro spare parts

UMIDIGI S3 Pro Technical Specifications

The UMIDIGI S3 Pro is a robust smartphone with powerful features to match its elegant design. Its key specifications include.

• Operating System: Android 9.0 Pie
• Processor/CPU: Helio P70, Octa-Core
• Display: 6.3-inch FHD+
• Storage: 6GB RAM, 128GB internal memory
• Camera: 48MP+12MP Dual Rear camera and 20MP front camera
• Battery: 5150mAh with fast charging feature

Replacement Guide for Umidigi S3 Pro

Tools Required

• Screwdriver
• Plastic pry tool
• Tweezers
• Hot air gun or blow dryer

Procedure

Note: Make sure you power off your device and remove the SIM card tray before starting the replacement process.

Step 1: Removing the Back Cover

Start by heating the edges of the back cover using a blow dryer or hot air gun. This will loosen the adhesive. Use a plastic pry tool to gently lift the cover from the edges.

Step 2: Removing the Battery

Unscrew the screws securing the battery connector with a screwdriver. Disconnect the battery connector. Now you can safely remove the battery.

Step 3: Replacing Damaged Parts

Unscrew and gently remove the component that needs to be replaced, whether it's the screen, camera or anything else. Directly replace it with the new part and make sure it's seated properly.

Step 4: Reassembly

Once the damaged component has been replaced, screw back the battery connector and place the battery back in. After that, put the back cover in its original position and press along the edges until it clicks into place.

Note: If your mobile is not powering on immediately, don't panic. It might take a while when turned on for the first time after replacement. If the problem persists, consult with a professional.