Unihertz Tank 2 spare parts

Unihertz Tank 2 Repuestos: Technical Characteristics

The Unihertz Tank 2 Repuestos is a rugged smartphone designed to resist outdoor and challenging environments. It offers the following technical features:

• Display: 2.4 inches, 240 x 320 pixels, TFT, 16M Colors.
• Ram: 512MB.
• Storage: 4GB, expandable up to 32GB using MicroSD Card.
• Battery: 1500mAh.
• Operating System: Android™ 9.0 Pie Go edition.

Instructions for Replacing Unihertz Tank 2 Repuestos

Precautions

Before attempting to replace parts on your Unihertz Tank 2 Repuestos, switch off the device and unplog it from the charger if connected. You should also remove the SIM card, the memory card, and battery where possible.

Tools Required

• Small Phillips Screwdriver
• Precision Tweezers
• Plastic Opening Tools

Replacement Process

Follow the steps outlined to replace the given part on your Unihertz Tank 2 Repuestos.

• Ensure the device is powered off.
• Use the provided SIM card removal tool to eject the SIM card from the device.
• Remove any external memory card if present.
• Remove the battery from its compartment.
• With the Small Phillips Screwdriver, remove the screws holding the back cover in place.
• Using a Plastic Opening Tool, carefully pry around the edges of the phone to remove the back cover.
• Proceed with caution to disconnect any cables directly connected to the replacement part.
• Carefully remove the desired part to replace.
• Install the new part by reversing the disassembly steps.
• Finally, assemble your device by pressing the back cover back into place and replacing the previously removed screws.

Note

Some internals parts may be held down with adhesive. Exercise care while prying them up to avoid damage.

Warranty

Before starting any replacement or repair, verify your device's warranty status, as unauthorised repairs could void your warranty.