Vernee Mars Pro spare parts

Vernee Mars Pro Repuestos: Technical Characteristics

The Vernee Mars Pro Repuestos components are designed to deliver unparalleled performance and quality in mobile technology. Here are the technical characteristics of key Vernee Mars Pro spare parts:

• Battery: 3500mAh battery, offers impressive backup time and is non-removable.
• Screen: 5.5 inch, Full HD (1920x1080 pixels) IPS display, Corning Gorilla Glass 3.
• RAM: 6GB LPDDR4, delivering smooth multitasking and efficient data processing.
• ROM: 64GB eMMC5.1, expandable up to 256GB with a TF card.
• Camera: 13MP rear camera with SONY IMX258 sensor and 5MP front camera for vivid and sharp images.

Instructions to Replace Vernee Mars Pro Repuestos

Follow these detailed instructions to replace the Vernee Mars Pro Repuestos:

Battery Replacement

Unfortunately, the battery in the Vernee Mars Pro is non-removable, so users cannot replace it on their own. If you experience issues, it's recommended to visit a professional.

Screen Replacement

• Step 1: Power off the Vernee Mars Pro and remove the SIM card tray.
• Step 2: Remove the back cover using a pry tool. Gently slide it around the edges to prevent any damage.
• Step 3: Disconnect the battery connector. This is crucial to avoid any short circuits during the operation.
• Step 4: Unscrew and remove the protective metal plate over the LCD connector.
• Step 5: Disconnect the LCD and digitizer connectors. Now you are free to remove the broken screen.
• Step 6: Attach the new screen, reconnect the LCD and digitizer connectors and secure the metal plate.
• Step 7: Reconnect the battery connector, replace the back cover and turn the phone on to test the new screen.

RAM and ROM Replacement

This smartphone's RAM and ROM are soldered onto the motherboard and are not intended to be replaced by regular users. If the memory components fail, you will need professional help.

Camera Replacement

• Step 1: Power off your Vernee Mars Pro and remove the back cover using a pry tool.
• Step 2: Remove the screws securing the mainboard and disconnect the battery to prevent any short circuit.
• Step 3: Locate the camera's connector on the motherboard and disconnect it gently.
• Step 4: Remove the defective camera, place the new one in the correct position and reconnect it to the motherboard.
• Step 5: Screw the mainboard back in, connect the battery and securely fasten the back cover. Power on the phone to check if the camera is working.