2. Mobile Spare parts
  3. Vernee
  4. Vernee Mix 2 spare parts

    Vernee Mix 2 spare parts

    There are 7 products.

    Technical Characteristics of Vernee Mix 2 Repuestos

    The Vernee Mix 2 repuestos are the individual components available for the Vernee Mix 2 smartphone. They are designed with the high quality and precision which are hallmarks of the Vernee brand.

    Screen

    The screen is a 6.0 inch, 2160x1080 pixel, IPS capacitive touchscreen. This allows for clear...

    Technical Characteristics of Vernee Mix 2 Repuestos

    The Vernee Mix 2 repuestos are the individual components available for the Vernee Mix 2 smartphone. They are designed with the high quality and precision which are hallmarks of the Vernee brand.

    Screen

    The screen is a 6.0 inch, 2160x1080 pixel, IPS capacitive touchscreen. This allows for clear, vibrant imaging.

    Processor

    The phone uses a Mediatek MT6757CD Helio P25 Octa-core 2.5 GHz Cortex-A53 processor, ensuring smooth operation and multitasking capabilities.

    Memory

    The Vernee Mix 2 repuestos include choice of either 64GB 6GB RAM, 64GB 4GB RAM, which can be expanded with an external MicroSD card.

    Battery

    With a capacity of 4200mAh, the battery is designed to last all day with moderate use.

    Camera

    The rear camera is dual, 13MP and 5MP, while the front camera is 8MP, providing the ability to capture high-quality images and video.

    Replacing Vernee Mix 2 Repuestos

    Please be aware that replacing parts on your smartphone can void your warranty and cause damage if not done correctly. Proceed at your own risk.

    Tools Needed

    • Screwdrivers
    • Plastic opening tools
    • Gloves

    Replacement Procedure

    1. Ensure the phone is turned off and not connected to any power source.

    2. With the correct screwdriver, carefully remove the screws at the base of the phone.

    3. Using the plastic opening tools, gently pry open the phone. Be careful not to damage the clips that hold the two halves together.

    4. Once inside, locate the part that needs replacing. Most components are modular and can be removed by disconnecting the connectors and removing any screws holding them in place.

    5. Once the faulty part has been removed, replace it with the new component. Make sure all connectors are securely in place.

    6. Once the replacement has been fitted securely, reassemble the phone by carefully clicking the two halves together and reinserting the screws. Make sure not to overtighten the screws.

    7. Turn on the phone to check if the replacement part functions correctly.

    Less
    More
    Showing 1 - 7 of 7 items

    My account