Vernee T3 Pro spare parts

Technical Characteristics of Vernee T3 Pro Repuestos

The Vernee T3 Pro is an advanced smartphone that comes with a set of repair parts or "repuestos" that can be replaced when they wear out or get damaged. Here are some of the primary components:

• Screen: 5.5-inch IPS, 1440 x 720 Pixels
• Battery: 4080mAh, non-removable lithium
• Back camera: 13.0MP + 2.0MP with LED flash and AF
• Front camera: 5.0 MP
• Processor: MT6739WA, 4x Cortex-A53, 1.5GHz
• RAM: 3GB
• Storage: 16GB, expandable up to 32GB

Instructions for Replacing Vernee T3 Pro Repuestos

Disclaimer

Please note that replacing certain smartphone components requires technical know-how. If not done properly, it could result in permanent damage to the device. Therefore, it's always recommended to seek professional help when replacing components like screen or battery.

General Steps

While the process could be slightly different based on the component being replaced, these are the basic steps:

• Power off the device: Before doing anything else, it's very important to switch off the smartphone.
• Remove the back cover: Use a plastic pry tool to carefully remove the back cover.
• Disconnect the battery: Unplug the battery connector from the motherboard.
• Remove the old part: Depending on the component you want to replace, you must unscrew and carefully detach it from the connection points on the device.
• Install the new part: Attach the replacement component exactly where the old one was removed from, and secure it as needed.
• Reconnect the battery: Plug the battery connector back into the motherboard.
• Replace the back cover: Reattach the back cover firmly.
• Power on the device: Switch on the smartphone to see if the new component is working correctly.