Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products (tax incl.)
Total shipping (tax incl.) To be determined
Tax: €0.00
Total (tax incl.)
Continue shopping Proceed to checkout

    Vernee Thor spare parts

    There are 8 products.

    Vernee Thor Smartphone Specifications

    The Vernee Thor is a great device with the following technical specifications:

    • Processor: Octa-core 1.3 GHz Cortex-A53
    • Display: 5.0 inch 720x1280 pixels
    • Battery: Non-removable Li-Ion 2800 mAh battery
    • Operating system: Android 7.0 (Nougat)
    • Memory: 16GB storage, microSD slot
    • RAM: 3GB
    • Camera: 13 MP Rear, 5 MP ...

    Vernee Thor Smartphone Specifications

    The Vernee Thor is a great device with the following technical specifications:

    • Processor: Octa-core 1.3 GHz Cortex-A53
    • Display: 5.0 inch 720x1280 pixels
    • Battery: Non-removable Li-Ion 2800 mAh battery
    • Operating system: Android 7.0 (Nougat)
    • Memory: 16GB storage, microSD slot
    • RAM: 3GB
    • Camera: 13 MP Rear, 5 MP Front

    Replacing Vernee Thor Parts

    Preparation

    Before you start inspecting and replacing any parts on your Vernee Thor, ensure that the device is switched off and disconnected from any power sources. It is also advisable to remove any SIM cards and memory cards. You'll also need a small screwdriver, a prying tool, and replacement parts.

    Step One: Removing the Back Cover

    Use your prying tool to gently detach the back cover from the phone. Start from the corner and carefully work your way around, making sure not to apply too much pressure to avoid damaging the device.

    Step Two: Removing the Battery

    Once the back cover is removed, you will see the battery. Carefully disconnect the battery from its connector and then lift it out of the phone.

    Step Three: Replacing the Faulty Part

    After the battery has been removed, locate the faulty part that requires replacement. This could be anything from the screen, the touch panel, the speaker unit, or the camera. The part will be held in place with screws, so use your screwdriver to unscrew and remove the part.

    Step Four: Installing the New Part

    Once the defective part is removed, place the new part in the same position, screw it into place, and connect any necessary cables or connectors. Ensure the part is firmly in place before proceeding.

    Step Five: Reassembling the Phone

    After replacing the part, replace the battery and connect it to its connector. Then, reattach the back cover, making sure it clicks into place securely. Switch on the device to ensure everything works correctly.

    This guide provides a basic overview of the replacement process. However, it is always recommended to take your device to a professional if you are unsure about any aspect of the replacement process.

    Less
    More
    Showing 1 - 8 of 8 items

    This store asks you to accept cookies for performance, social media and advertising purposes. Social media and advertising cookies of third parties are used to offer you social media functionalities and personalized ads. Do you accept these cookies and the processing of personal data involved?