Vernee V2 Pro spare parts

Vernee V2 Pro Repuestos Technical Specifications

The Vernee V2 Pro is a robust smartphone with a variety of features that ensure optimal performance. When it comes to repairs, knowing the technical specifications of Vernee V2 Pro repuestos is important here are the main ones:

• Display: 5.99" Full HD Plus IPS Screen with 2160 x 1080 resolution.
• Processor: Media MTK6763, Octa-Core with a speed of 2GHz.
• Battery: 6200mAh with fast charging support.
• Operating System: Android 8.1 Oreo.
• Camera: Dual Rear camera setup with 21MP Sony IMX230 + 5MP and a 13MP+5MP Front Camera.
• RAM and Storage: 6GB RAM with a 64GB storage capacity that's expandable to 128GB with a memory card.

Replacing Vernee V2 Pro Repuestos

Below are the steps to follow when replacing Vernee V2 Pro repuestos. Please note: those instructions require technical knowledge. If you don’t feel comfortable doing this yourself, it’s recommended to take your smartphone to a professional.

Materials Needed for The Procedure

• Screwdriver
• Nylon Spudger
• Guitar Pick
• New Vernee V2 Pro repuestos

Instructions

Step 1: Turn off the smartphone to avoid any damages that can be caused by electricity.

Step 2: Remove the back cover of the smartphone using the nylon spudger and guitar pick. Start from the bottom corner and gently pry the back cover.

Step 3: Once the rear cover is off, you’ll notice screws around the casing. Use the screwdriver to remove these screws. Remember to keep them safe as you will need them when reassembling the phone.

Step 4: Remove the relevant part that needs to be replaced.

Step 5: Replace the old piece with the new Vernee V2 Pro repuestos.

Step 6: Reassemble the smartphone by following the disassembly steps in reverse order. Don’t force down any part; every component should fit in easily.

Note: Make sure the screws are screwed in properly during reassembling not to damage the motherboard, and the back cover is tightly fit to avoid dust getting into the device.