Vivo X60 Pro 5G V2046 spare parts

    There are 31 products.

    Vivo X60 Pro 5G V2046 Repuestos - Specifications

    Vivo X60 Pro 5G V2046 is a high-performance device that features top-notch components. Let's first look at its key specifications:

    • Display: 6.56 inches (16.66 cm) Full HD+ AMOLED with 120Hz refresh rate
    • Processor: Qualcomm Snapdragon 870
    • RAM: 12GB
    • Storage: 256GB
    • Rear Camera: 48MP + 13MP + 13MP
    • Fr...

    Vivo X60 Pro 5G V2046 Repuestos - Specifications

    Vivo X60 Pro 5G V2046 is a high-performance device that features top-notch components. Let's first look at its key specifications:

    • Display: 6.56 inches (16.66 cm) Full HD+ AMOLED with 120Hz refresh rate
    • Processor: Qualcomm Snapdragon 870
    • RAM: 12GB
    • Storage: 256GB
    • Rear Camera: 48MP + 13MP + 13MP
    • Front Camera: 32MP
    • Battery: 4200 mAh, fast charging 33W
    • Operating System: Funtouch OS 11.1 (based on Android 11)

    Replacing Vivo X60 Pro 5G V2046 Repuestos

    Here is a step-by-step guide designed to help you replace parts of your Vivo X60 Pro 5G V2046. Please remember that it is recommended to have it serviced by a professional if you do not have the necessary skills and tools.

    Tools Required:

    • Heat gun, or a blow dryer
    • Plastic pry tool and spudgers
    • Small Phillips screwdriver
    • Tweezers

    Step 1: Power off the phone

    Before disassembling, switch off your Vivo X60 Pro 5G V2046 to avoid any electrical damage.

    Step 2: Remove the Back Cover

    Use the heat gun to warm the edges of the back cover. This will help loosen the adhesive. Then, use the plastic pry tool to carefully lift off the back cover.

    Step 3: Remove the Battery

    Unscrew all necessary screws and disconnect the battery connector using a plastic spudger tool. Carefully pry the battery out of its compartment.

    Step 4: Disconnect and remove components

    When replacing specific parts, carefully disconnect the relevant connectors and remove the screws securing the parts.

    Step 5: Replace Component

    Place the new component in the right place and secure it with the necessary screws. Connect the corresponding connectors.

    Step 6: Reassemble the phone

    Reconnect the battery connector and replace the back cover. Screw any previously removed screws back into their respective places.

    Disclaimer:

    Remember, disassembling your phone can void your warranty and can potentially damage your device if not done correctly. If you are unsure, it is recommended to take your phone to a professional repair service.

    Less
    More
    Showing 31 - 31 of 31 items